User's Guide

109
■ Interface down: 3
■ Interface up: 3
■ Flush conntrack table: all unchecked
■ Metric: this is not an input, just for display
○ Click SAVE & APPLY
○ Click the Interfaces Tab to return to the MWAN - Interfaces view and repeat the
setup for wan_b
Figure B.B.3 - MWAN Interface wan_a Load Balancing configuration
B. Configure MWAN Members with Load Balancing settings
○ Navigate to the Members Tab
○ On the text input line next to the ADD button enter “wan_a_main” (In this
example we use wan_a_main to indicate the high priority member for load