User's Guide

126
Use Case F: SNMPD Trap Alerts
Example: Send traps to a SNMP server using SNMPV2
Configure the unit to send trap alerts to an SNMP server hosted on the network using
SNMP version 2.
Steps:
1. Navigate to Services > SNMPD
Figure B.F.1 - Services > SNMPD
2. Scroll down to the “v2c Traps” section, click the ADD button to open the lines for text
input and enter the required information:
● Host: IP address of the SNMP server
● Community: SNMP community string to use when sending traps to the server. This
community needs to match the community on the server side.
● Port: Port on the SNMP server that will be receiving the traps
Figure B.F.2: Services > SNMPD: v2C Traps
3. Click the SAVE & APPLY button.