User's Guide

67
Figure 76: Wireless > Wireless Network > Advanced [Top Card] and General Setup [Bottom Card]
Configuration options available on the bottom card of the Edit wireless network dialogue
vary depending on the wireless mode configuration.
A common configuration, for example, is to configure the unit as a wireless access point.
To set this up, under the General Setup tab (located on the bottom card of the Edit
wireless network dialog) use the following options:
Mode
Access Point
ESSID
Network name as it appears on client devices.
Network
The network(s) to attach to the wireless interface.
Hide ESSID
Check to hide the network
(requiring manual SSID entry to connect)
WMM Mode
Check to enable WiFi Multimedia (WMM) mode
(prioritizing multimedia packets for quality of service)
Table 7: Wireless Access Point Typical Setup Options
Under the Wireless Security tab (located on the bottom card of the Edit wireless network
dialog), the user can configure network security settings. Configuration options vary
based on encryption type selected. We recommend using a strong security WPA2
encryption.