User's Guide

82
● To pass raw arguments to the underlying iptables command
The Traffic Rules tab displays existing traffic rules and provides add / edit / delete
functionality.
Figure 95: Network > Firewall > Traffic Rules
When adding / editing an existing Rule, the Firewall - Traffic Rules dialogue is displayed.
Firewall - Traffic Rules > General Settings is provided to configure the Traffic Rule
matching criteria:
● Protocol
● Source zone
● Destination zone
● IP address and port
And to set the action to take for packets matching the rule.
Available actions are summarized below:
Accept - Allow the traffic to pass the firewall
Reject - Drop the traffic
Don’t Track - Do not keep track of traffic