Bria 2.4 for Windows User Guide www.counterpath.
CounterPath Corporation CounterPath Corporation Suite 300, One Bentall Centre 505 Burrard Street, Box 95 Vancouver, BC V7X 1M3 Tel: 604.320.3344 sales@counterpath.com www.counterpath.com © July, 2008 CounterPath Corporation. All rights reserved. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Contents Introduction...................................................................................................................................1 Installation and Setup....................................................................................................................3 Getting Ready .........................................................................................................................3 Installing Bria .................................................................
CounterPath Corporation ii
1 Introduction Bria is a softphone from CounterPath that enables you to make VoIP phone calls, to send and receive instant messages, to share presence (availability) information, and to exchange files. Bria implements SIP-based standards for phone calls, IM and and presence, allowing you to work with a multitude of different VoIP servers and service providers. Bria also uses XMPP-based standards for instant messaging (IM) and presence.
CounterPath Corporation • RFC 3920 • RFC 3921 Supported extensions: • • • 2 • XEP-0004 • XEP-0016 • XEP-0022 • XEP-0077 • XEP-0085 • XEP-0092 • XEP-0115 STUN and ICE NAT traversal. XTunnels for firewall traversal. Support for DTMF (RFC 2833, inband DTMF or SIP INFO messages). Support for languages.
2 Installation and Setup 2.1 Getting Ready Account Information After choosing a VoIP service provider, you will need the following information: • • • • • User name Password Authorization Name (if applicable) Domain Firewall traversal and other network information; see “Configuring Accounts” on page 65. XMPP Accounts If you use an XMPP service for instant messaging or presence, you will need the following information: • • • Jabber ID: user name and domain. For example, jsantos@domainXMPP.com.
CounterPath Corporation Multimedia Device Requirements Bria requires both speakers and a microphone to make calls. Any of the following configurations are acceptable: • • • • • • External speakers and microphone Built-in speakers and microphone Dual-jack multimedia headset Bluetooth® multimedia headset USB multimedia headset USB phone.
Bria 2.4 for Windows User Guide 2.3 Configuring Bria If Bria is not already running, start it as you would any other program: Use the Windows Start menu or double-click the desktop icon. Bria appears. Setting up Accounts After obtaining SIP, SIMPLE, and (if applicable) XMPP account information from your VoIP service provider, you can set up Bria accounts. 1. From the Bria menu, choose File > Account Settings. The Account Settings window appears. 2. Click Add > New SIP Account.
CounterPath Corporation 6
Bria 2.4 for Windows User Guide 4. Complete the remaining tabs as specified by the service provider or to suit your setup. Settings that you may need to change immediately include: • Account tab, Domain Proxy area. • Topology tab, if your computer is on a network and/or behind a firewall. For more information, see “Configuring Accounts” on page 65. 5. On the Account Settings window, click Apply to register the newly added account. 6. If you are setting up an XMPP account, click Add > New XMPP Account.
CounterPath Corporation 8
3 Using Bria 3.1 Starting Bria If Bria is not already running, start it as you would any other program: Use the Windows Start menu or double-click the desktop icon. Bria appears. Receiving a Presence Request If availability is enabled, then at any time you may get a Presence Request dialog box. For information on this request, see “Availability” on page 42. 3.2 Shutting Down To shut down Bria, click File > Exit, or press Ctrl+Q.
CounterPath Corporation 3.3 The Onscreen Softphone Bria menu. See below. Call panel. See page 14. Address Book panel. See page 35. The Bria Menu File • • • • My Profile. See page 49. Preferences. These settings control the way that you work with Bria and apply to all accounts. See page 50. Account Settings. These settings control how Bria interacts with your VoIP service provider, and are set individually for each account. See page 65. Exit. To shut down Bria. You can also exit by pressing Ctrl+Q.
Bria 2.4 for Windows User Guide Actions Lists the actions that you can perform, depending on the current “state” of Bria. For example, if a contact is selected, it lists all the actions that can be performed on that contact. Help Provides access to various service-related features.
CounterPath Corporation Showing and Hiding Parts of the Softphone Restore to large view Show/hide Dial pad Show/hide Video panel Display as Deskbar. See page 12 Close to System Tray Close Call panel (only Call entry field will remain). Click again to open. Move Phone Book to a separate window Show/hide Phone Book Drag to resize You can still receive calls when Bria is hidden or minimized. If you exit when Bria is minimized or in Deskbar mode; Bria will start next time as minimized or in Deskbar mode.
Bria 2.4 for Windows User Guide The Deskbar provides a compact GUI for performing many Bria actions. It is assumed that you will work in this mode after you are quite familiar with Bria and its features.
CounterPath Corporation 3.4 Placing a Call You can contact someone using: • • A softphone address (for example, kpereira@domainA.com) A traditional phone number, if supported by your VoIP service provider. You can place a call when another call is already in progress. There is no limit to the number of calls you can make, although eventually the quality of audio and video will degrade because of limitations on the computer. We recommend no more than six concurrent calls.
Bria 2.4 for Windows User Guide How Keying From the... Dialpad or computer keyboard Description 1. If another call is currently in progress, click on the Call toolbar. A new Call Entry area appears. The current call is put on hold. 2. Enter the softphone address or number in the Call entry field using the dialpad or the computer keyboard. For the name, you can enter the entire softphone address (kpereira@domain.com) or just the name (kpereira).
CounterPath Corporation Placing another Call To place a new call (without hanging up on the current call), click the Start another Call button. In the Current Calls bar, a tab appears for each separate call. Start another Call button Hiding your Identity You can hide your identity on a call, so that the other person will not see your ID on their phone. Click Options > Hide my Number for this Call. the usual way. appears on the Call control bar for this call.
Bria 2.4 for Windows User Guide If You Do not Select an Account – Auto Account If you have more than one account enabled and if you do not select the account, Bria selects the account to use to place the call as follows: • • If a dial plan exists for any account, Bria runs through the dial plans to determine if the dialed number matches any of these plans. If a match is found, the account that the dial plan belongs to is used. See “Dial Plan” on page 82.
CounterPath Corporation 3.5 Handling an Incoming Call Bria must be running to answer incoming calls. (If Bria is not running, incoming calls may be directed to voicemail; check with your VoIP service provider.) Bria rings and information about the incoming call appears in the Call entry field. In addition, the Call Alert box appears, even if Bria is minimized. For information on call alerts, see “Preferences – Alerts & Sounds” on page 51. The softphone address of the person calling you is displayed.
Bria 2.4 for Windows User Guide 3.6 Handling an Established Call While the call is in progress you can: • • • • • • Control the audio: use the speakerphone, mute the call, control volume. Record the call. Put the call on hold. Add the caller as a contact. Transfer the call. See the next page. Add video. Pause and resume video when video is already present. See “Video” on page 22 Show/hide video panel. See page 22 Conference call.
CounterPath Corporation 3.7 Transfering a Call Quick Transfer You can set up a list of phone numbers that calls can be transferred to. Then during a call, you can transfer to any of these numbers by selecting from a list. To set up the numbers: 1. Click File > Preferences from the menu. Display the Transfer panel. 2. Enter as many numbers as you want. To enter a new number, click in an empty line. To remove an entry, click in the line and delete the number.
Bria 2.4 for Windows User Guide Attended Transfer – Call then Transfer You can first speak to the target (the person you are transfering the call to), then click Transfer to complete the transfer. 1. Click Options > Call then Transfer. The first call is put on hold and a New call tab appears 2. Call the target in any of the normal ways. 3. When you are ready, click Transfer; the message Transfer Successful appears. If the target does not want to take the call, simply end the call with that person.
CounterPath Corporation 3.8 Video Show/hide video panel Adding Video Either you or the other party can add video at any time. To add video, open the Video panel and click Start My Video. When you add video, the other party may (or may not) start sending their video to you. You can add video, even if you do not have a camera, in order to start receiving the other party’s video. Other Party Adds Video If the other party starts their video, the Video panel automatically opens and the video is played.
Bria 2.4 for Windows User Guide 3.9 Voicemail If your service includes voicemail, then when you have voicemail messages, the word “new” appears beside the voicemail icon at the top of the phone. Click the icon to automatically connect to voicemail and listen to your messages. Voicemail icon 3.10 Forwarding Calls Forwarding Calls You can enable or disable forwarding so that calls will be forwarded to another number.
CounterPath Corporation 3.11 Conference Calls Starting a Conference Call You can create a conference call starting from one existing call: 1. Click the Conference icon. Bria enters “conference mode” and “Call a conference participant” appears on the call display. 2. Place the second call in one of these ways: • Right-click on a contact and choose Add to Conference Call. • Type a name or number. (Or to cancel the call, click the Cancel button.
Bria 2.4 for Windows User Guide Conference is now established Managing the Conference Adding More Participants You can add more participants to an existing conference in any of these ways: • • • • Right-click on a contact and choose Add to Conference Call. From the tab that contains the conference, click the Conference icon. Place a call by typing a name or number. When the callee answers, the call will automatically be added to the conference.
CounterPath Corporation Suspending the Conference To suspend the conference, click the Hold button. Audio Controls Adjusting Volume. Use the speaker adjustment to adjust volume of the sound you are hearing. Mute. Click on the dialpad to prevent the other parties from hearing you. The display. When you mute, you may also want to stop video feed, if any. Speakerphone. Click icon appears on the call on the dial pad to put the callers on the speaker phone. The icon appears on the call display.
Bria 2.4 for Windows User Guide How Video Is Shared When you conference two calls together, video continues as it was before the conference call. For example, if you were sharing video with one party, and only sending your video to another party, then that is how the video will be handled when the conference call is created. The conference host serves as the “funnel” for other video. Whatever the conference host is receiving will automatically be sent to the other parties.
CounterPath Corporation 3.12 Instant Messaging Instant messages are made using softphone addresses. Therefore, you can send or receive an instant message (IM) to: • • • Any contact who has a softphone address. Any party who phoned you from a softphone address. Any party whom you phoned using a softphone address. Sending an IM 1. There are several ways to select the person to send an IM to. From the Contacts tab in the Address Book Right-click on the contact and choose Send Instant Message.
Bria 2.4 for Windows User Guide Receiving an IM When an IM is received, either the IM window or a Call Alert pops up. (To control which window appears, see “Preferences – Application” on page 50.) If the IM window is already displayed with an IM session with another person, the message from the new person appears in another tab in that window. (You can set up Bria so that each person has their own IM window; see “Preferences – Application” on page 50.
CounterPath Corporation Conference IM—Group Chat Group chat allows you to exchange instant messages with a group of people in the same session. All people must have XMPP accounts configured in order to participate in group chat. Group chat differs from a broadcast IM in that all parties see everyone’s messages, and the messages each party sends are seen by everyone else.
Bria 2.4 for Windows User Guide Viewing the IM Archive You can view your recent IM activity for any contact or group chat session. Do one of the following: • • Right-click a contact and choose View Instant Message Archive. On the menu, click View > Instant Message Archive. In the Archive window, click the desired contact under Conversations With. Right-click to delete all chat history for a person. Right-click to delete the selected conversation or conversations.
CounterPath Corporation 3.13 Sending and Receiving Files Sending Files If you have an XMPP account, you can send files to any contact who also has an XMPP account. 1. From the Contacts tab, right-click a contact and choose Send Files. (If the contact does not have an XMPP address, then this menu does not appear). Or from an existing IM window, choose Send a File.
Bria 2.4 for Windows User Guide Receiving Files If you have an XMPP account, another person with an XMPP address may send you files. The following dialog appears, to allow you to save the file.
CounterPath Corporation 3.14 Email You can send an email to one or more contacts, or to all the contacts in a group. Select the contact, contacts or group, right-click and choose Send E-mail. An email window opens in your default email application, with the “to” line populated with all those contacts who have email addresses (in their Contact Profiles).
4 Using the Address Book The Address Book panel, which is divided into tabs, provides access to the following: • • • Contacts. Call history. See page 41. Contact availability (presence). See page 42. 4.1 Contacts Tab Add a Contact Search field Display all contacts Display only contacts who are set up for Availability and who are currently online The availability of others. See page 42.
CounterPath Corporation Setting up Contacts Adding a Contact Click , or right-click a group and choose Add Contact to Group. The Contact Profile dialog box appears. See the table on page 39. This button is always displayed for a new contact. It also appears once you enter a new address for an existing contact. Table 1: Contact Profile Fields Field Description Contact name Only the display name is required.
Bria 2.4 for Windows User Guide Contact Profile — Advanced Dialog This dialog lets you fine tune the presence sharing information for this contact and change the account that each address is associated with. Presence Sharing You can configure which accounts will be used for presence sharing: none, some or all. • • If you disable all items, this contact will not have an availability icon beside its name in the Contact list.
CounterPath Corporation • • Create a new contact: Click Create. Change the display name, contact method, and group if desired. Click OK. Update an existing contact. Click Update. Choose a different contact, if necessary. Change the contact method and group, if desired. Click OK. If the contact method is Softphone or Jabber, an online status request is sent to this person. Importing Contacts You can populate the Bria contact list by importing from an external file or files.
Bria 2.4 for Windows User Guide 3. Save the file as *.csv. External Storage of the Contact List Each time Bria is started, the contact list is retrieved from the external storage. Each time a contact is added to the contact list, it is immediately copied to external storage. The list is always stored on the local computer. In addition, if you have access to a remote storage server, you can configure Bria so that the contact list is also stored remotely using XCap or WebDAV.
CounterPath Corporation Using Contacts Phone or IM the person • • Double-click the contact to start a phone call or IM to the person (depending on how double-clicking is configured in the contact’s profile). Drag the contact to the call display to start a phone call. Phone the person Right-click and choose Call, then click the desired number. Send an IM Right-click and choose Instant Message. See page 28. Call a contact and include video Right-click the contact and choose Video Call.
Bria 2.4 for Windows User Guide 4.2 History Tab Display all calls Missed calls Received calls Dialed calls Canceled outgoing Answered call (incoming or outgoing) Missed or blocked incoming Managing the Lists of Calls You can right-click on an entry in a list to: • • • • • Delete the call. Delete all entries in this list. Block this person to control whether they can send you phone calls or instant messages, or see your online availability.
CounterPath Corporation 4.3 Availability Availability refers to the ability to see whether a person is available or not: online, on phone, busy, and so on. Your availability information is displayed below on the main menu. The availability of others is displayed in the Contacts tab. You can publish your availability to contacts who have softphone address, and you can set up Bria to view the availability of other contacts.
Bria 2.4 for Windows User Guide Sharing Availability Watching Others’ Availability When you create a contact by entering details in the Contact Profile, the contact is automatically set up so that you share availability. If you created a contact by importing a contact list, it is not automatically set up to shared. You must display the Contact Profile and click the Advanced button. See “Contact Profile — Advanced Dialog” on page 37.
CounterPath Corporation • • If you set up a privacy rule before this person has a chance to contact you, then you will never see this request. Bria will automatically reply to the request according to the rule. See “Preferences – Privacy” on page 52. If you do not yet have a privacy rule set up for this person or for their domain, this request appears to you as a Presence Request. You must respond to the request: • Block the request. This person will not be able to contact you from this address.
Bria 2.4 for Windows User Guide Setting your Availability Changing your Availability Click the down arrow beside the availability indicator on Bria, and select the desired availability. See Table 2, below. When your availability changes, the new availability is sent to everyone who has permission to see your availability, according to the Privacy Settings (see “Preferences – Privacy” on page 52).
CounterPath Corporation Table 2: Availability Indicators Indicator Do not disturb Meaning for your Availability Meaning for Others’ Availability You have set your availability to this status. Bria will never automatically You cannot make phone calls switch you out of this status; you must switch yourself. or IMs to this person. Both incoming phone calls and incoming IMs will be directed to voicemail. However, you can still make phone calls and IMs.
Bria 2.4 for Windows User Guide 4.4 Privacy You can control how contacts and other people can contact you by phone or IM, and you can control whether your contacts can see your availability information (whether you are online, one the phone, and so on). You can set up controls in advance or “on the fly” (as phone calls and presence requests come in). Setting up Controls in Advance To set up controls in advance, see “Preferences – Privacy” on page 52.
CounterPath Corporation On an Incoming IM To block who sends an IM, choose Options > Block this Person on the Instant Message window. Then close the window. The other person gets a message that their instant message has been declined. This person is added to your Blocked List (see page 52). In addition, if the person is a contact, then “blocked” appears beside their name in the contact list. You will no longer see incoming calls or instant messages from this person; they will automatically be declined.
5 Configuring Bria You can configure Bria in several ways: • • • Set up your personal profile. See below. Configure global behavior. See “Configuring Preferences” on page 50. Configure the behavior on a per-account basis. See “Configuring Accounts” on page 65. 5.1 Configuring your Profile To set up information about yourself, choose File > My Profile.
CounterPath Corporation 5.2 Configuring Preferences Choose File > Preferences. The Preferences window appears. The Preferences panels let you control the way that you work with Bria. Preferences – Application This panel lets you set your preferences for general GUI behavior.
Bria 2.4 for Windows User Guide Preferences – Alerts & Sounds This panel lets you control the Call Alerts box and lets you assign sounds. Showing Call Alert Box You can control whether the Call Alert box is displayed in different situations. Assigning Sounds You can assign specific sounds to a variety of actions or “events”. 1. Select the Enable sounds check box and select the check boxes for each desired event, or clear the Enable sounds check box to disable all sounds. 2.
CounterPath Corporation Preferences – Privacy You can control how contacts and other people can contact you by phone or IM, and you can control whether your contacts can see your availability information (whether you are online, on the phone, and so on). Choose one. If you choose “Allow only”, then all contacts will be able to contact you unless they or their domain are in the Blocked list (below). This section is optional. It lets you enter addresses and domains that will be prevented contacting you.
Bria 2.4 for Windows User Guide Preferences – Quick Transfer This panel lets you set up a list of phone numbers that calls can be transferred to. Then during a call, you can transfer to any of these numbers by selecting from a list. Enter as many numbers as you want. To enter a new number, click in an empty line. To remove an entry, click in the line and delete the number. Set one of the numbers as the default. See “Quick Transfer” on page 20 for information on using this feature.
CounterPath Corporation Preferences – Devices Bria automatically detects devices at each startup, and selects the most appropriate device for each purpose. If you do not like this selection, you can override it on this panel. If you override a selection, it will apply the next time you start Bria, unless the device is no longer available, in which case Bria will again select the device to use.
Bria 2.4 for Windows User Guide Field Description Headset Mode Speaker Change these fields only if you want to override the devices that Bria automatically selected. Microphone In both these fields, select the headset you are using. The headset is the device that is usually used for audio out (the sound you hear) and audio in (recording your voice). The only situation in which the headset is not used is when the Speaker Phone button on the dialpad is pressed.
CounterPath Corporation Preferences – Network Field Network Connection Speed Description Select the type of network connection for your computer. The sliders move to show the bitrate that will be used for sending and receiving. These rates are typical rates for the selected configuration. If you know that your computer and network can handle a faster sending speed, click Custom and move the slider. It is recommended that you not change the receiving speed.
Bria 2.4 for Windows User Guide Preferences – Audio Codecs This panel shows all the codecs that are included in the retail version of Bria. You can enable or disable codecs as desired. With only one codec enabled, all calls made will use that codec. With more than one codec enabled, Bria automatically chooses the best codec based on the other party’s capability, the available bandwidth, and network conditions. You cannot change the properties of any codecs.
CounterPath Corporation Supported Codecs Bria supports a wide range of codecs. See the table. Codec Narrowband Wideband Included in Retail Bria Royalty-bearing AMR Wideband (G.722.2) 3 Broadvoice-32 3 3 Broadvoice-32 FEC 3 3 DVI4 3 3 3 3 DVI4 Wideband 3 EVRC 3 3 G.711aLaw * 3 3 G.711uLaw * 3 3 G.722 3 G.723 3 3 3 G.726 3 G.
Bria 2.4 for Windows User Guide Preferences – Video Codecs Video codecs describe the format by which video streams are compressed for transmission over networks. Some codecs require less bandwidth than others, but may result in lower video quality. You can enable or disable codecs as desired. You may decide to disable a codec even though your VoIP service provider supports it. With only one codec enabled, all calls made will use that particular compression format.
CounterPath Corporation Preferences – Quality of Service These fields appear only on versions of Bria that include video. The Quality of Service panel lets you request a specific transport service for audio, video and signaling traffic.
Bria 2.4 for Windows User Guide There are two types of services. The service to use depends on what your internet service provider supports: • • GQoS, which is available for audio and video. DSCP (also known as ToS), which is available for audio, video and signaling. In a network that has the default configuration, the recommended value for audio is 46, because “46” is the standard marking for audio. Bria supports 802.1p QoS packet tagging.
CounterPath Corporation Preferences – Contact Storage These settings let you set up a remote storage system for your contact list via WebDAV or XCAP. (The contact list is always stored locally, even when you set up for remote storage.) The contact list holds general information for contacts. It is automatically loaded at startup, and is loaded even if no accounts are enabled.
Bria 2.4 for Windows User Guide Preferences – Diagnostics This panel lets you enable logging to files. Logging uses computer resources, so you should only enable it when instructed by a customer support representative. To set up logging: 1. Click Enable diagnostic logging. 2. Set the logging level. 3. Specify the folder where logs will be saved. 4. Click OK. Activity on Bria will be logged to.csv files in the specified folder. A new set of files is started each time you log on.
CounterPath Corporation Preferences – Advanced Field Reduce echoes Description Turning this feature on improves sound quality. This feature is typically on. Use slower but more compatible video format Turning this field on may improve performance when running Bria on older hardware.
Bria 2.4 for Windows User Guide 5.3 Configuring Accounts Choose File > Account Settings.The Account Settings window appears. Accounts Settings Window To work with accounts, choose File > Account Settings from the menu. The Account Settings window appears, showing all the accounts set up. You can: • • • • Add or remove an account. Enable one or more accounts. See below for details. Set one account as the default. See below for details. Set or change the properties of an account.
CounterPath Corporation Setting the Default Account When multiple SIP accounts are enabled, the first account listed is always the default. Use the Move Up and Move Down buttons to set the desired account as the default. The dial plan rules may select the default SIP account in order to place an outgoing call, as described on “Which Account Is Used?” on page 16.
Bria 2.4 for Windows User Guide XMPP Account A red dot appears here to alert you when the Jabber ID field is blank or when the Jabber ID is incomplete. The alert disappears after you type “@” in the Jabber ID. A red dot appears here to alert you when the Password field is blank. The alert disappears after you enter a password. Table 4: XMPP Account Properties – Account Field Account name Protocol Description If desired, change the account name to something that is meaningful to you.
CounterPath Corporation Table 4: XMPP Account Properties – Account Field Resource Priority 68 Description Optional resource, as specified in RFC 3920. For example "/home". If this setting is blank and the Jabber ID includes a resource, the value from that ID is used. If both are specified, the value from this Resource field is used. If no resource is specified, the XMPP server will assign a temporary resource. The priority, as per RFC 3921. The default is 0.
Bria 2.4 for Windows User Guide SIP Account Properties – Account A red dot appears here to alert you when the User ID field is blank or when the User ID is incomplete. The alert disappears after you type “@” in the User ID. Table 5: SIP Account Properties – Account Field Account name Protocol Description If desired, change the account name to something that is meaningful to you. For example, the name of the VoIP service provider. Read-only. Always specifies SIP.
CounterPath Corporation Table 5: SIP Account Properties – Account Field Send outbound via Description Choose the setting specified by your VoIP service provider: • Domain: If your VoIP service provider requires that traffic be directed to proxies that are discovered via the domain. • Proxy Address: If your VoIP service provider has an outbound proxy address and requires that you provide the address to Bria. For the address enter a domain name (for example, domain.com) or an IP address (for example, 123.
Bria 2.4 for Windows User Guide SIP Account Properties – Voicemail Complete these settings only if your service provider offers voicemail. These settings let you set up Bria to forward calls in several situations. Your service provider may also provide the ability to set up for voicemail outside of Bria, for example, by phoning a softphone address and following the voice prompts, or by accessing a website. Check with your service provider to determine if another setup mechanism is available.
CounterPath Corporation Table 6: SIP Account Properties – Voicemail Field Number for sending calls to voicemail Description Complete only if your VoIP service includes voicemail. This is the number that incoming calls will be forwarded to if they are unanswered after the specified interval (below), or when you click the icon on the call display. If you leave this field empty, then this icon will not be displayed. However, leaving this field does not mean that voicemail does not work.
Bria 2.4 for Windows User Guide SIP Account Properties – Topology Table 7: SIP Account Properties – Topology Field Description Firewall Traversal IP Address This setting controls how your IP address is presented. • Discover global address: Let Bria determine your public IP address. This is the recommended setting unless your VoIP service provider advises otherwise. • Use local IP address: use the IP address of the Bria computer. STUN Server The recommended setting is Discover global address.
CounterPath Corporation Table 7: SIP Account Properties – Topology Field Description XTunnels Use XTunnels The appropriate setting depends on whether your VoIP service provider has an XTunnels server. Server Address • Automatic: Use Xtunnels when Bria detects a firewall that prohibits communications. This is the recommended setting if your service provider has an XTunnels server. • Always: Always use XTunnels. • Never: Do not use XTunnels.
Bria 2.4 for Windows User Guide SIP Account Properties – Presence Presence allows other softphone users to see your online availability, and also allows you to see the online availability of others. This tab lets you set up to share presence information with contacts who have addresses associated with this SIP account (for information on account association, see “Contact Profile — Advanced Dialog” on page 37). (Note that you do not have to set up to share presence information on an XMPP account.
CounterPath Corporation SIP Account Properties – Storage These settings let you set up a remote storage system for the buddy list for this SIP account. (Note that the buddy list for an XMPP account is always stored on the XMPP server; no configuration is required). Table 9: SIP Account Properties – Storage Field Storage method Description The storage method to be used for the buddy list and presence rules. The file can be stored locally or both locally and on a remote computer.
Bria 2.4 for Windows User Guide SIP Account Properties – Security Table 10: SIP Account Properties – Security Field Signaling Transport Description Contact your VoIP service provider to identify the types of transport that are supported. Then choose a supported transport: • Automatic: Bria sets up the transport based on the capabilities of the network and the Bria computer. Choose this option if you do not care which transport is used. • TCP: This transport provides no signaling security.
CounterPath Corporation SIP Account Properties – Advanced s Table 11: SIP Account Properties – Advanced Field Description Register Settings Reregister every The time interval between Bria’s attempts to reregister in order to refresh the account registration with the VoIP service provider for this account. A value of zero means not to reregister after the initial registration. This value is placed in the “Expires” header field of the REGISTER message. Minimum time The factory setting is 3600.
Bria 2.4 for Windows User Guide Table 11: SIP Account Properties – Advanced Field Maximum time Description This is the maximum wait time between attempts to reregister. Once this maximum is reached, Bria will wait this time for all subsequent attempts. For example, the min. time is 20 secs, the maximum time is 120 secs. Bria will attempt to reregister as follows: • • • • • • • • • Wait 20 secs. Attempt to connect. If fail, wait 40 secs. Attempt to connect. If fail, wait 80 secs. Attempt to connect.
CounterPath Corporation 80
A Application Hot Keys Function Keyboard Shortcut Answer Enter Exit Ctrl+Q Hang up Esc Hold Period Mute Spacebar 81
CounterPath Corporation B Dial Plan When a call attempt is made, the call input (what you type, select or drag onto the call display) is processed to select the SIP account to use and to modify the input if that is required to ensure that the call gets placed successfully. This ability to select an account and modify the input relies on the existence of a “dial plan” for each account.
Bria 2.4 for Windows User Guide B.1 Dial Plan Syntax In Bria, the dial plan establishes the expected patterns of characters for a telephone number or softphone address, and allows for modification (transformation) of input based on the match to a pattern. The dial plan has the following syntax: pattern[|pattern];match=1;=;[match=2; =;] Where: • • • Items in [ ] are optional. Pattern: the pattern that will be matched. One or more patterns.
CounterPath Corporation Element Origin Description \a Regular expression rules Wildcard for any single alphanumeric character. [digit-digit] Regular expression rules A digit within the specified range. [charactercharacter] Regular expression rules A character within the specified range. [digit1, digit2, digit3] Regular expression rules One of the characters in the collection. . Digit map rules Repeat the last element 0 or more times. For example, xxxx.
Bria 2.4 for Windows User Guide B.2 How the Input Is Processed Comparing Input to the Dial Plan Patterns The input is compared to each dial plan in turn, starting with the first listed account. The process is slightly different depending on how the call is placed: • • If the input was dragged or selected, then the entire input is compared to each dial plan. If a complete match is found, then that account is selected and the associated transformation is performed.
CounterPath Corporation B.3 Examples Example 1 \a\a.T|xxxxxxx.T;match=2;pre="9" This simple example shows how to differentiate between a PSTN number and a softphone address, and how to add a “9” dialing prefix only to the PSTN number. Example 2 3xxT|1xxxxxxxxxx|[2-9]xxxxxxxxx|+x.T;match=2;pre="9"; match=3;pre="91";match=4;prestrip=1;pre="9011" 3xxT The first pattern is any three-digit number beginning with 3. No transformation. The assumption is that this is an internal extension.
Bria 2.4 for Windows User Guide • Handling of the account prefix (#1), if you are upgrading from Bria 1.1 and are accustomed to entering the account number. Use of # to identify the account is now deprecated. The dial plan should be capable of determining the account to use for this number. However, since users may still be in the habit of entering the account prefix, you may want to include this pattern to handle such a scenario.
CounterPath Corporation C Contact List Headings Following is a list of all the headings that are used in the Bria contact list. This list can be useful when formatting a contact list in order to import it into Bria.
Bria 2.4 for Windows User Guide D Location of Files System files get copied to the installation directory specified when installing Bria. The default installation directory is: C:\Program Files\CounterPath\Bria Data files are saved in the Counterpath folder in the standard location for application data, as defined in Windows.
CounterPath Corporation E Other Ways to Run Bria E.1 From a Hyperlink You can attach a hyperlink to a phone number or softphone address that, when clicked, starts Bria and dials the number. Attach a hyperlink with this format: dial For example: dial kpereira@domain.com E.2 From the Command Line You can start Bria from a DOS prompt. You may need to add Bria.exe to the PATH. Then type: Bria.
Bria 2.4 for Windows User Guide F Glossary AEC AGC AVI Broadband Codec Default account Dial plan DTMF IM IP IP address Media MWI Narrowband Presence Proxy PSTN Acoustic echo cancellation. Processing of the audio or video signal to reduce the echo effect that can arise with a speakerphone or that can arise if the sound from the speakerphone or headphone leaks into the microphone. Automatic gain control.
CounterPath Corporation RFC RTP Signaling SIMPLE protocol SIP SIP account softphone address SRTP TCP TLS UDP URI URL USB device VAD vCard VoIP VoIP service provider WAV 92 Request for Comment. A document that describes an aspect of an internet technology. An RFC may be a proposed, draft or full internet standard. Real-time Transport Protocol. A protocol for delivering the media portion of a data transmission over an IP network. SRTP is another media protocol.