Operating instructions

16 DR
®
POWER GRADER™
10. Reconnect the Control Cable to the Receptacle Box in the Yoke and raise the DR POWER GRADER
(lower the wheels) with the Control Box Rocker Switch in the Raise position.
11. With the help of another person, you can now roll the DR POWER GRADER off the shipping pallet.
NOTE: You must now fully charge the Battery of your new DR POWER GRADER before using the machine. See the next
page.
Hitch Clip
Clevis
Pin
A
xle Clevi
s
Insert Spacer from
the top down.
Spacer Spacer
Figure 11
Linear Actuator Arm