Operating instructions

24 DR
®
POWER GRADER™
Operating Parameters
There are four (4) different types of tow vehicles recommended for the DR POWER GRADER. Each vehicle
type has specific strengths, weaknesses, and operating parameters when used with the DR POWER GRADER.
• Lawn Tractor
- 14 HP and/or 500 pound tractor minimum for the 48" Model.
- 19 HP and/or 500 pound tractor minimum for the 60" Model.
- 5° slope or less.
- Material loosened during grading increases traction difficulties.
- Very good speed control and turning radius.
- Frequent Scarifying Teeth adjustment is
necessary to maintain traction.
- Forward motion of the DR POWER GRADER should
be initiated before ground contact.
• Garden Tractor
- 14 HP and/or 500 pound tractor minimum for the 48" Model..
- 19 HP and/or 500 pound tractor minimum for the 60" Model.
- 5° slope or less.
- Material loosened during grading increases traction difficulties.
- Very good speed control and turning radius.
- Frequent Scarifying Teeth adjustment may be
necessary to maintain traction.
- Forward motion of the DR POWER GRADER may need
to be initiated before ground contact.
• ATV
- Traction issues are less evident.
- More difficult to maintain consistent speed.
- Turning radius is large (best used for large, straight drives).
• Utility Tractor
- Traction is excellent.
- Visibility is very good.
- With the increased power, the chance of accidentally damaging the DR POWER GRADER’s frame is
increased.
• Truck or Car
- Do not use these types of vehicles; the DR POWER GRADER would be difficult to see.
- NEVER operate the DR POWER GRADER with a Truck (2WD or 4WD); doing so will void the DR
POWER GRADER Warranty.