Operating instructions

CALL TOLL-FREE 1-800-DR-OWNER 31
CHAPTER 6
TROUBLESHOOTING
Most problems are easy to fix. Consult the Troubleshooting Table below for common problems and their
solutions. If you continue to have trouble, call Country Home Products, Inc. for support.
Troubleshooting Table
WHEN PERFORMING ANY MAINTENANCE, YOU MUST FIRST SHUT OFF THE TOW VEHICLE, SET THE
PARKING BRAKE, LOWER THE GRADER TO THE GROUND, AND UNPLUG THE CONTROL CABLE.
SYMPTOM POSSIBLE CAUSE
Frequently have to
re-align the
Scarifying Teeth
Plates.
⇒ Dirt has accumulated between the Scarifying Teeth Plates and Grader Frame.
Remove the Scarifying Teeth Plates and wipe down the surfaces between the
plates and the frame to remove accumulated dirt. Re-install the plates.
The wheels on the
tow vehicle spin
during the grading
operation
.
⇒ The Scarifying Teeth are set too low, causing too large a section of surface to be
removed. Raise the height of the Scarifying Teeth Plates to improve traction.
⇒ There is too much weight in the Weight Tray. Remove some of the weight.
⇒ The Tow Vehicle is not adequate for your application.
The Scarifying Teeth
Plates will not move
up or down with
Control Box.
⇒ The battery charge is low; charge the battery.
⇒ Loose wire connection. Check the connection at the Control Box quick release
connector and the battery terminal connections.
⇒ If the problem persists, call 1-800-DR-OWNER (376-9637) for assistance.