Road-towable Safety & Operating Instructions

COUNTRY HOME PRODUCTS, Inc.

MEIGS ROAD, P.O. BOX 25, VERGENNES, VERMONT 05491

Daily Checklist for the DR ROAD-TOWABLE CHIPPER

To help maintain your DR ROAD-TOWABLE CHIPPER for optimum performance, we recommend you

follow this checklist each time you use your machine.

[ ] OIL: With the machine on a level surface, check the engine oil level with the dipstick and add more

if necessary (only add oil to the level indicated on the dipstick - DO NOT OVERFILL). Use

SAE 30 high detergent motor oil.

[ ] GAS: Fill the gas tank with clean, fresh, unleaded gasoline.

[ ] ENGINE AIR COOLING SYSTEM: It is very important to keep the engine clean of debris. Remove

grass and other built-up materials from the air intake screen

before, during and after you chip. Regularly remove debris from

the blower housing and cooling fins. A dirty engine retains heat

and can cause damage to the internal engine parts.

[ ] CHIPPER HOPPER: Inspect the Chipper Hopper for accumulated debris.

[ ] KNIFE: Inspect the Chipper Knife for tightness, nicks and wear.

[ ] BELT: Check the condition of the Drive Belts for nicks and cuts.

[ ] GENERAL CONDITION: Check the general condition of the machine, e.g.; nuts, bolts, welds etc.