Operating instructions



ALL-TERRAIN



FIELD and BRUSH MOWER Safety & Operating Instructions 25

Removing and Replacing the Belts

To Replace the Blade Belt

1. Remove the black belt guard by

unscrewing the black knob,

lifting the cover, and pulling up

and back to remove it.

2. Release the belt tension lever

(Figure 14).

3. Remove the belt from the

pulley (Figure 15), and then

drop it from the engine pulley

below the machine.

4. To mount the belt, follow the

above procedure in reverse.

Figure 14

WARNING! Before performing any maintenance procedure, stop the

engine and disconnect the spark plug wire(s).

Important! Use only DR belts on your machine. They have been

thoroughly tested and proven for many hours of use.

Belt Tension Lever

Belt Removed

ure 15