User's Manual

14
The Earset comes with two collar clips: one black and
one white. These clips prevent movement in the cable
from dislodging the Earset and can reduce cable
noise. They are specifically designed to match the
diameter of your E6 cable, either 1mm or 2mm.
Gently pull the cable down into the opening to attach
the clip. Gently pull the cable out to remove the clip.
We recommend always using a collar clip with the
Directional E6. Use both attachment points as shown.
We recommend leaving the clip attached to the cable
when possible to minimize repetitive strain.
Using Collar Clips