User's Manual

5
The Earset cable is easy to remove and change,
allowing you to swap transmitter types, switch colors,
or replace damaged parts in the field. Exercise care in
connecting and disconnecting the cable connector.
• Always grasp the connectors near the outer ends
of the rubber sleeves and pull the connectors
straight apart. When connecting listen for a click.
• The connectors do not unscrew and normally
rotate freely.
• Avoid grasping the connectors where the sleeves
overlap, as this can weaken the moisture-resistant
seal and deteriorate the integrity of the connection.
• Do not pull by the cable, boom, or springy part of
the Earset.
Connecting Snap-On Cables