User's Manual

Countryman Associates, Inc. 195 Constitution Drive, Menlo Park, CA 94025 US: [phone] Intl: 650-364-9988 F: [phone]
[e-mail] For more information and warranty registration visit www.countryman.com Made in the United States.
Which response should I choose?
The EMW Lavalier is available in three frequency responses, all of which deliver audio quality
with exceptional warmth and smoothness.
• “F” Response: the attest possible curve for uncolored reproduction of audio sources such
as musical instruments or room ambient sounds.
• “S” Response: provides a smooth 6 dB “shelved up” curve between 2 kHz and 15 kHz to
compensate for lost facial reflections when the mic is used on the exterior of the body, as in
the typical lapel or tie-clip position. This is the standard “lavalier” frequency response.
• “P” Response: provides a sharp 12 dB “peaked” curve at 12 kHz to preserve sibilance and
intelligibility when the mic is hidden under clothing.
20
10
dB
Frequency (Hz)
0
-10
-20
-30
20 50 100 200 500 1k 2k 5k 10k 20k
EMW Lavalier: Frequently Asked Questions
Which clip should I choose?
Countryman manufactures a wide variety of clips which increase the versatility of the EMW.
• The standard tie clip comes in black and white; both colors are provided with the EMW. This
lightweight plastic clip is a good choice for ties and lapels. The white clip can be colored with
a felt pen if a custom color match is necessary.
• The double tie clip can hold two EMW microphones for applications where low-prole
redundancy is important.
How water resistant is the EMW?
The EMW is very water resistant, designed for immersion in water down to one meter. The
stainless steel core and aramid-reinforced cable are coated in engineering polymers for
protection against a wide variety of liquids.
• The viper grip clip has two pins on the back and slides securely into cloth at any angle. The
clip is designed to hold the active side of the microphone a fraction of an inch away from the
back plate (A). The microphone’s inactive side (B) faces outward. Turning the active side of
the capsule into the surface of the clip in this way provides more protection from handling
noise and creates a boundary type effect. The viper grip is a good choice for discrete
placement on the inside or outside of clothing and is available in colors to match the EMW.
• The magnetic clip consists of two halves that can be placed on either side of a piece of cloth
and clamp together magnetically. The inner piece has a lanyard made of clear nylon line,
which can be hooked over a button to make retrieval easier. This clip is ideal for attaching
the mic to delicate materials where pins are inappropriate.
EMW in cola beverage.
B
A