Technical data

107106
ØD
Ød
H
ØD
H
Ød
EXHAUST CAP
LOUVRED CAP
A full roof penetration kit
consists of 2 pieces of insulated
penetration ducting,
2 roof ashing items,
1 exhaust cap, 1 louvred cap,
2 connectors and
3 metres of spiral pipe.
ROOF CAP UNIT
ROOF
PENETRATION KIT
PRODUCT INFORMATION
Ød ØD H
AML 100 / CV 80
125 250 230
CV 200
160 260 310
AML 300 / AMP 300
200 315 380
AML 500 / AMP 500
250 355 437
AML 800 / AMP 800
AMP 900
CV 1000
315 450 540
AMP 1200
400 500 700
Ød = internal diameter ØD = external diameter H = height
NB: The height dimensions indicated are to the upper edge of the lowest hole.
The exhaust cap has the same external dimensions as Airmaster’s
insulated pipework, providing an optimum fit.
Also available in black, at extra charge.
Ød ØD H
AML 100 / CV 80
125 250 130
CV 200
160 260 160
AML 300 / AMP 300
200 315 160
AML 500 / AMP 500
250 355 191
AML 800 / AMP 800
AMP 900
Cv 1000
315 450 222
AMP 1200
400 500 284
Ød = internal diameter ∙ ØD = external diameter ∙ H = height
The louvred cap has the same external dimensions as Airmaster’s
insulated pipework, providing an optimum fit.
Also available in black, at extra charge.
AMP 900 / AMP 1200 Ød ØD H H x B x D
Exhaust cap 315 450 540 -
Louvred cap 315 450 540 -
Box AMP 900 - - - 1000x950x500
Box AMP 1200 - -
-
1004x884x434
On roofing felt with a pitch of 0-30°, a so-called roof cap unit should be used for the AMP
900 vertical model and AMP 1200 vertical model. Here the exhaust and louvred caps are
integrated in a box.
Remember to specify the roof pitch when ordering.