Technical data

CTS
1
16 17
CONTROLS
AIRLINQ
INTELLIGENT CONTROL
Airmaster's overall control system consists of control
software, a control box and control panel.
All Airmaster ventilation units are controlled by fully
automatic, intelligent control system software – Airlinq.
Airlinq allows full use of units directly after installa-
tion. All basic functions are pre-programmed by the
factory.
The Airlinq control system is able to automatically
counter high and low inlet temperatures, to ensure the
room temperature set is maintained. Effective protec-
tion functions prevent the heat exchanger from icing
up, drain off condensation and automatically stop the
unit if necessary. Unnecessary damage to the unit is
therefore prevented.
The system is easy to set and program to individual
requirements from customers or for local conditions.
The software controls the options installed automati-
cally, such as bypass, heating surfaces, cooler module
and sensors (CO
2
, humidity, movement etc.) whenever
required.
Airmaster focuses not only on the ventilation
unit, but also on the control system software
and operation.
data log
A new and unique function which logs
all major operating and room data, e.g.:
• Inlet temperature
• Room temperature
• Outdoor temperature
• CO
2
level
• Air humidity
• Air volume
• Damper position
all-in-one
All intelligence is concentrated in the
unit, which means that it can run fully
automatically without having to be con-
nected to a control panel.
airlinq Pc tools
Your unit can be monitored and adju-
sted from a PC, using the Airlinq User
Tool.
Service engineers can use the more
advanced Airlinq Service Tool.
download to Pc
The unit's operating data can be
downloaded to a PC to provide rapid
overview of operation, and to generate
operating documentation. This allows
full optimisation of the unit.
airmaster sensors for Bms
Airmaster's movement sensor (PIR) and
CO
2
sensors can be used on network
systems. The result is very simple
and inexpensive connection to a BMS
system.
monitoring, warning and alarm
system
The advanced warning and alarm
system helps minimise operating and
service costs. Errors are quickly de-
tected, making the unit more reliable.
flexiBility with digital Bms
Airlinq can be quickly fitted with a
network module (optional PCB) to pro-
vide flexible connection to one of the
following network systems:
• KNX
®
• BACnet
TM
/IP
• BACnet
TM
MS/TP
• LON
®
• MODBUS
®
RTU RS485
AIRLINQ CTS
Up to 20 different and individually
equipped ventilation units can be
controlled using a single control panel
in an Airlinq CTS. The system has a lot
more features than the Master-Slave
system in current use.
Airlinq's unique control functions:
BMS