User Manual MINIAMP AMP800 Ultra-Compact 4-Channel Stereo Headphone Amplifier
MINIAMP AMP800 User Manual Table of Contents Important Safety Instructions...............................3 Legal Disclaimer......................................................3 Limited Warranty....................................................3 1. Introduction........................................................4 1.1 Before you begin......................................................4 1.1.1 Shipment..............................................................4 1.1.2 Initial operation.........
MINIAMP AMP800 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twistlocking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
MINIAMP AMP800 User Manual 1. Introduction 1.1.3 Online registration Thank you very much for expressing your confidence in our products by purchasing one of our headphone amplifier systems. This 4-channel stereo headphone amplifier is designed for use with all types of headphones and therefore provides maximum flexibility. Its high-power stereo amplifiers guarantee the highest sonic quality. The ultra low-noise 4580 operational amplifiers ensure outstanding audio performance.
MINIAMP AMP800 User Manual 2. Control Elements 2.1 Front panel The AMP800 is a headphone amplifier that includes 4 Headphone Channels, so you can share the AMP800 with other musicians. In addition, each musician can choose between 2 audio channels: Input Channel A and Input Channel B. ◊ Ensure that only qualified personnel set up and operate the AMP800. This section describes how to use the front panel of the AMP800, illustrated as follows: (1) (2) (3) (4) (5) (6) (7) (8) Fig. 2.
MINIAMP AMP800 User Manual 2.2 Rear panel This section describes how to use the rear panel to set up the AMP800. The following illustrates the rear panel of the AMP800: (9) (10) (11) (12) (13) Fig. 2.2: AMP800 rear panel In the previous illustration, each control element is associated with a callout, for example (1) . In this section, use these callouts to identify details about each control element: (9) POWER connector: To power the AMP800, connect the power supply unit to this connector.
MINIAMP AMP800 User Manual About setting up with other MINI products The AMP800 belongs to the MINI suite of BEHRINGER products. You can set up the AMP800 with these products. For details, see 6. Other Mini Products. 4.
MINIAMP AMP800 User Manual 5. Specifications INPUT POWER SUPPLY Type ¼" TRS connector, balanced Impedance approx. 20 kΩ, balanced approx. 10 kΩ, unbalanced CMRR 40 dB typ. @ 1 kHz PHONES OUT Type ¼" TRS connector, stereo Impedance min. 100 Ω Max. output level +13 dBu @ 100 Ω load LINK OUT A Type Mains connection external power supply, 9 V~ / 750 mA Mains Voltage USA/Canada 120 V~, 60 Hz U.K.
MINIAMP AMP800 User Manual 6. Other Mini Products The MINIAMP belongs to the MINI suite of BEHRINGER products, which can operate together and are introduced below: MINIFEX FEX800 Ultra-compact 9.
We Hear You