Tus neeg siv phau ntawv
Table Of Contents
- POC-621 Series (DC-/ AC-in model)
- Contents
- 1 General Information
- 1.1 Introduction
- 1.2 Specifications
- 1.3 Dimensions
- Figure 1.1 Dimensions of the POC-621
- Figure 1.2 POC-621 Hot Swappable Battery Pack Dimensions
- Figure 1.3 POC-621 with Smart Card Reader Dimensions
- Figure 1.4 POC-621 with RFID & Camera Accessory Dimensions
- Figure 1.5 POC-621 VESA Mounting
- Figure 1.6 POC-621 Series Front Panel
- 1.3.1 Optional Modules
- 1.3.2 Cleaning and Disinfecting the Solution
- 1.4 Operating Principle
- 1.5 Intended User Profile
- 1.6 Front Bezel Button
- 2 System Setup
- 3 Hot Swapping Battery Pack Operation
- 4 Operation and Safety
- A POC-621 Series VESA Mounting
- B Driver Installation
- C PCM-8722 Connector Map
- D PCM-8722 Jumper Settings
- D.1 PCM-8722 Jumper setting
- Table D.1: CN3 ME Manufacturing Mode
- Table D.2: CN5 Clear CMOS
- Table D.3: CN6 (Not Install) Clear ME
- Table D.4: CN8 (Not Install) System Reset
- Table D.5: CN13 LVDS Voltage Setup
- Table D.6: CN40 Power Button (Internal Test Only)
- Table D.7: PCN4 Power Debug (Reserved)
- Table D.8: SW1 Board Setup
- Table D.9: SW1 Pin 4 Speaker Function
- Table D.10: SW2 Panel Resolution/Type Setup
- D.1 PCM-8722 Jumper setting
- E Advanced BIOS Functions
3 POC-621 Series User Manual
Chapter 1 General Information
I/O Ports
USB 3.2 Gen 2
(Type A),
2 x (USB 3.2 Gen 2)
USB 3.2 Gen 2
(Type C)
1 x (with display function via USB type C alternative
mode)
USB 2.0 Type A 4 x
Mic in/ Headphone
out
1 / 1
LAN isolation,
1.5KV
2 x
HDMI 1 x
Serial Ports 2 x RS-232(isolated 1.5KV) serial port
DCIN Default 18V DC IN
Power Input DC/AC
DC model: 18V, max. 100W/AC model: 100 ~ 240V,
max. 150W (choose either DC or AC model)
Authentication
Solution
(Choose 1)
RFID Reader Optional (choose either RFID or smart card reader)
Smart Card Reader Optional (choose either RFID or smart card reader)
Battery Solutions
(Choose 1)
Backup Battery** Optional (choose either backup battery or PCIe x4)
Hot-Swapping Bat-
tery Module
Optional with 2 x batteries (choose either backup
battery or hot swapping battery module)
Certification EMC & Safety
Medical CE, FCC (IEC 60601-1-2, 4th edition)
EN 60601-1 Compliance
UL 60601-1
Environment
Operating Tempera-
ture
0 ~ 35 °C/32 ~ 95 °F
Storage/transporta-
tion Temperature
0 ~ 50 °C/32 ~ 122 °F
Shock Resistance
20G peak acceleration (11ms duration)
10G with Hot swapping battery pack
Humidity
Operating: 10% ~ 90%@40°C non-condensed,
Storage/transportation: 5% ~ 90%@40°C non-con-
densed,
Pressure
700-1013 hPa (Operation)
700-1060 hPa (Storage)
700-1060 hPa (Transportation)
Physical
Characteristics
Dimensions
(W x D x H)
523 x 356 x 62 mm (20.59 x 14.02 x 2.44 in)
Weight (Bare sys-
tem)
6.29 kg/13.86 lb
VESA Mount
100 x 100 mm, 75 x 75 mm/3.93 x 3.93 in, 2.9 x 2.9
in