Tus neeg siv phau ntawv
Table Of Contents
- POC-621 Series (DC-/ AC-in model)
- Contents
- 1 General Information
- 1.1 Introduction
- 1.2 Specifications
- 1.3 Dimensions
- Figure 1.1 Dimensions of the POC-621
- Figure 1.2 POC-621 Hot Swappable Battery Pack Dimensions
- Figure 1.3 POC-621 with Smart Card Reader Dimensions
- Figure 1.4 POC-621 with RFID & Camera Accessory Dimensions
- Figure 1.5 POC-621 VESA Mounting
- Figure 1.6 POC-621 Series Front Panel
- 1.3.1 Optional Modules
- 1.3.2 Cleaning and Disinfecting the Solution
- 1.4 Operating Principle
- 1.5 Intended User Profile
- 1.6 Front Bezel Button
- 2 System Setup
- 3 Hot Swapping Battery Pack Operation
- 4 Operation and Safety
- A POC-621 Series VESA Mounting
- B Driver Installation
- C PCM-8722 Connector Map
- D PCM-8722 Jumper Settings
- D.1 PCM-8722 Jumper setting
- Table D.1: CN3 ME Manufacturing Mode
- Table D.2: CN5 Clear CMOS
- Table D.3: CN6 (Not Install) Clear ME
- Table D.4: CN8 (Not Install) System Reset
- Table D.5: CN13 LVDS Voltage Setup
- Table D.6: CN40 Power Button (Internal Test Only)
- Table D.7: PCN4 Power Debug (Reserved)
- Table D.8: SW1 Board Setup
- Table D.9: SW1 Pin 4 Speaker Function
- Table D.10: SW2 Panel Resolution/Type Setup
- D.1 PCM-8722 Jumper setting
- E Advanced BIOS Functions
POC-621 Series User Manual 4
Optional
Configuration
Operating System
Windows 10 IoT Ent (64 bits only), Linux (support by
request)
Memory Up to 32GB DDR4 SODIMM x 2
Primary Storage
NVME SSD 128/ 256G/ 512GB or 1TB (M.2 2280,
PCIe Interface)
Secondary Storage
1 x 2.5" SATA SSD(2
nd
storage) optional
WLAN
Intel Wireless-AC9260 or Intel Dual Band Wireless-
AC 8265
Bluetooth 5.1/ 4.2
RFID
RFIDEAS OEM-7522AXU
(Support RFID Frequency 13.56MHz, Support Card
type: HID iCLASS, ISO 14443A, MIFARE ®, ISO
15693, NFC 1 (Topaz), FeliCa (NFC 3), ISO 14443B,
CEPAS, MIFARE ® DESFire ®) Optional (either
RFID or Smart Card, choose one)
Smart Card
Smart Card Reader.
Optional (either RFID or Smart Card, choose one)
Backup Battery
Internal single battery pack (POC-IPSM90B, Li-ion
8400mAh 10.8V 90.72Wh 3S3P). Optional (either
backup battery or Hot Swapping Battery Module,
choose one)
Hot swapping Bat-
tery module
Optional with 2 x batteries (choose either backup
battery or hot swapping battery module)
Camera 5MP, Auto Focus
TPM 1.2/2.0 TPM 2.0 (default via firmware)
Touch Panel
21.5”, Default clear glass/Optional AR/ Optional AG
Coating