Tus neeg siv phau ntawv
Table Of Contents
- POC-621 Series (DC-/ AC-in model)
- Contents
- 1 General Information
- 1.1 Introduction
- 1.2 Specifications
- 1.3 Dimensions
- Figure 1.1 Dimensions of the POC-621
- Figure 1.2 POC-621 Hot Swappable Battery Pack Dimensions
- Figure 1.3 POC-621 with Smart Card Reader Dimensions
- Figure 1.4 POC-621 with RFID & Camera Accessory Dimensions
- Figure 1.5 POC-621 VESA Mounting
- Figure 1.6 POC-621 Series Front Panel
- 1.3.1 Optional Modules
- 1.3.2 Cleaning and Disinfecting the Solution
- 1.4 Operating Principle
- 1.5 Intended User Profile
- 1.6 Front Bezel Button
- 2 System Setup
- 3 Hot Swapping Battery Pack Operation
- 4 Operation and Safety
- A POC-621 Series VESA Mounting
- B Driver Installation
- C PCM-8722 Connector Map
- D PCM-8722 Jumper Settings
- D.1 PCM-8722 Jumper setting
- Table D.1: CN3 ME Manufacturing Mode
- Table D.2: CN5 Clear CMOS
- Table D.3: CN6 (Not Install) Clear ME
- Table D.4: CN8 (Not Install) System Reset
- Table D.5: CN13 LVDS Voltage Setup
- Table D.6: CN40 Power Button (Internal Test Only)
- Table D.7: PCN4 Power Debug (Reserved)
- Table D.8: SW1 Board Setup
- Table D.9: SW1 Pin 4 Speaker Function
- Table D.10: SW2 Panel Resolution/Type Setup
- D.1 PCM-8722 Jumper setting
- E Advanced BIOS Functions
POC-621 Series User Manual 16
2.2 Installation Procedures
2.2.1 Connecting the Power Cord (DC model)
The POC-621 can only be powered by a DC adapter (SINPRO Model no.HPU101-
107). Be sure to always handle the power cords by holding the plug ends only.
Follow these procedures in the correct order:
1. Connect the female end of the power cord to the AC Adapter.
2. Connect the 3-pin male plug of the power cord to an electrical outlet.
Figure 2.5 Connecting the Power Cord
2.2.2
Connecting the DCIN
AC Adapter output DCIN plug output the DC power for POC system.
Please plugin to POC DCIN.
Caution! Adapter DCIN plug has specific direction. Please align the plug and
DCIN connector correctly.
Warning! Miss direction plug-in may damage the POC system or adapter.
ATTENTION! La prise DCIN de l'adaptateur a une direction spécifique.
Veuillez aligner correctement la fiche et le connecteur DCIN.
AVERTISSEMENT! Le plugin Miss direction peut endommager le système POC ou
l'adaptateur.