Product Info

LT103OEM UWB Radar Module
Pag. 9 of 14 Rev.2.1
17
UART_TX: UART Transmitter Pin
18
Ground
19
Vdd
DIG
: Digital Power Supply Voltage (may be shorted to P5)
20
Ground
21
Ground
22
TRX_SYNC: Synchronization Signal (Multi-module)
23
Ground
24
Ground
Table 2: LT103OEM pins description
7 Firmware
LT103OEM module is provided with a pre-programmed FW, this FW provides:
• Direct access to the data processing section: raw data or partially processed data
• Moving target detection algorithm
• Front-end control and parametrization
Fig. 6: FW structure
The figure shows the basic structure of the FW. Currently only one application is provided,
but the module can run multiple application according to the user needs (ex. Presence
detection, breath analysis, etc.). See documentation for details about communication
protocol and algorithms.