Instruction manual

21
TROUBLESHOOTING GUIDE
Problem Solution
Cannot turn the
transceiver power ON.
• Thebatterypackmaybedead.
Recharge or replace the battery
pack.
• Thebatterypackmaynotbe
installed correctly. Remove the
batterypackandinstallagain.
Battery power dies shortly
after charging.
• Thebatterypacklifeisnished.
Replacethebatterypackwitha
new one.
Cannottalktonorhear
other members in your
group.
• Makesureyouareusingthe
samefrequencyandQT/DQT
settings as the other members in
your group.
• Othergroupmembersmaybetoo
faraway.Makesureyouarewithin
range of the other transceivers.
Other voices (besides
group members’) are
present on the channel.
• ChangetheQT/DQTsettings.
Makesureallgroupmembers
change the settings on their
transceivers to match the new QT/
DQT setting.