Product Manual

ManualsBrandsCovidien / Cardinal Health ManualsDiagnosticsFilac 3000 AD Electronic Thermometer with Advanced Features

3000AD/ADA

Electronic Thermometer

TABLE OF CONTENTS

SECTION PAGE

I. About Body Temperatures ................................................................................................................................................. 1

II. General Information ............................................................................................................................................................ 1

III. Safety and Warnings ........................................................................................................................................................... 2

IV. Icon Identification ................................................................................................................................................................ 2

V. Instructions For Use ............................................................................................................................................................. 4

Probe Covers —Applying & Removing .......................................................................................................... 4

Changing Isolation Chambers and Probes .................................................................................................... 4

Oral & Axillary Temperature Taking ................................................................................................................ 5

Rectal Temperature Taking ............................................................................................................................... 5

Direct Mode .......................................................................................................................................................... 6

Quick Mode .......................................................................................................................................................... 6

Cold Mode ............................................................................................................................................................ 6

Recall Last Temperature .................................................................................................................................... 6

Pulse Timer Mode ................................................................................................................................................ 6

Bio-Tech Mode (Option Configuration Menu) ............................................................................................. 7

VI. Cleaning and Sterilization .................................................................................................................................................. 9

VII. Battery Replacement / Installation .................................................................................................................................. 9

VIII. Mounting Instructions ........................................................................................................................................................ 9

IX. Anti-Theft Features & Options .......................................................................................................................................... 9

X. Troubleshooting .................................................................................................................................................................10

XI. Specifications ......................................................................................................................................................................10

XII. Customer Service ...............................................................................................................................................................11

XIII. Warranty ...............................................................................................................................................................................13

This product contains software solely owned by Tyco Healthcare Group LP. Tyco Healthcare Group LP grants the user a non-exclusive, limited

license to use the software according to the operating instructions. A copy of the license can be obtained from Tyco Healthcare Group LP.

ENGLISH

Status: Approved Doc#: AW10002310 Effective Date: nulldate

10/16/2007 Artwork#s: WN 182508-01AD Job#: 14909

Summary of content (14 pages)

PAGE 1
Status: Approved Doc#: AW10002310 Effective Date: nulldate ENGLISH Table of Contents Section PAGE I. About Body Temperatures.................................................................................................................................................. 1 II. General Information............................................................................................................................................................. 1 III. Safety and Warnings........................
PAGE 2
Status: Approved Doc#: AW10002310 Effective Date: nulldate I. About Body Temperature It is a common myth that 98.6°F (37°C) is the “normal body temperature.” The truth is that 98.6°F (37°C) is an average body temperature. Normal body temperature is actually a range that varies with age, gender, and measurement site. Body temperatures also fluctuate through out the day, typically cooler temperatures in the morning, warmer in the afternoon, and cooling down again in the evening.
PAGE 3
Status: Approved Doc#: AW10002310 Effective Date: nulldate • • • • • 15, 30, 45 and 60 second pulse Timer Easily accessible probe cover box Easy to read LCD display with backlight Cold Mode – lower pre-heat temperature option provides quicker, accurate readings for post-OR patients Theft prevention lock out and anti-theft accessories III. Safety and Warnings Caution: Federal law (USA) restricts this device to sale by or on the order of a physician. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
PAGE 4
Status: Approved Doc#: AW10002310 Effective Date: nulldate ORAL Temperature Mode Works only with BLUE probe and isolation chamber AXILLARY Temperature Mode Works only with BLUE probe and isolation chamber RECTAL Temperature Mode Works only with RED probe and isolation chamber Install/Remove Probe Cover Flashing probe cover reminder to install probe cover prior to use and remove cover after use Out of Range - High Temperature measurement is above 109°F (43°C) Out of Range - Low Temperature measurement
PAGE 5
Status: Approved Doc#: AW10002310 Effective Date: nulldate V. Instructions For Use Probe Covers —Applying & Removing 1. Open probe cover box by lifting tab at top corner and pulling to remove top panel. 2. Insert box of probe covers into top of isolation chamber. (To aid infection control, never switch boxes between blue and red isolation chambers. Also, never switch probes between blue and red isolation chambers. Keep like colors together.) 3. Remove probe from the probe well.
PAGE 6
Status: Approved Doc#: AW10002310 Effective Date: nulldate Oral & Axillary Temperature Taking 1. Make certain that the Blue isolation chamber/probe unit is attached. 2. Withdraw probe and apply a probe cover. The thermometer turns on automatically. 3. An icon identifying Oral or Axillary mode is displayed. The Rectal icon can not be displayed when a blue isolation chamber/probe is attached. 4. Press the Site button on the front panel to select either the Oral or Axillary mode. 5.
PAGE 7
Status: Approved Doc#: AW10002310 Effective Date: nulldate Direct Mode 1. The FILAC 3000 electronic thermometer normally operates in Predictive mode for accurate temperature measuring. In certain cases, such as with a hypothermic patient, the thermometer will automatically shift to Direct (slow) mode and will then act as a temperature monitor. 2. The FILAC 3000 electronic thermometer can be set to operate exclusively in Direct mode (disable Predictive mode).
PAGE 8
Status: Approved Doc#: AW10002310 Effective Date: nulldate Bio-Tech Mode (Option Configuration Menu) 1. To enter Bio-Tech mode, the thermometer must be in sleep mode (probe securely in place with blank screen). 2. Press and hold the Site and °C/°F buttons at the same time for 4 seconds. A “beep” is heard and a dash scrolls in the display. The software version of the device will be shown in the alpha-numeric section of the display 3. The thermometer is now in Bio-Tech mode.
PAGE 9
Status: Approved Doc#: AW10002310 Effective Date: nulldate What You See or Hear Dashes & Software Version Option Configuration X, YZ with moving dash No Function DIR with Blinking Direct Mode Lock ON THEFT with Blinking Anti-Theft (Off, 10, 20,50, 90) OFF (blank) 10 OFF 20 ON 50 ON 90 ON ON COLD with Blinking Cold Mode ON OFF ON OFF ON OFF FAST with Blinking Quick Mode NO More Options MORE YES 8 programmable characters, selected alpha-numeric characters blinking Alph
PAGE 10
Status: Approved Doc#: AW10002310 Effective Date: nulldate VI. Cleaning and Sterilization 1. 2. 3. 4. 5. 6. 7. The entire device may be easily wiped clean. Water temperature should not exceed 130° F (55° C). Do not submerge or soak under water. A mild detergent may be added to water. Use of cleaners such as Spray NineTM*, PhisohexTM*, HibiclensTM*, or Vesta-SydeTM* CidexTM* may result in damage to the thermometer case.
PAGE 11
Status: Approved Doc#: AW10002310 Effective Date: nulldate X. Troubleshooting 1. 2. 3. If device fails to function properly after washing & reconnecting probe, rinse all contacts in de-ionized water and blow dry. Icons indicate all other possible errors and remedies.
PAGE 12
Status: Approved Doc#: AW10002310 Effective Date: nulldate Patient Accuracy: In standard predict mode, thermometer accuracy meets EN 12470-3 Batteries: Four “AA” Required. Standard IEC package size. Alkaline – 1.5 Volt Approximately 6000 temperature readings. Probe: Replaceable. For probe integrity/safety checks, refer to qualified Biomedical Technician or return to Kendall. Isolation Chamber: Removable, replaceable, washable, Polycarbonate-polyester blend.
PAGE 13
Status: Approved Doc#: AW10002310 Effective Date: nulldate In the event that it becomes necessary to return a unit for service, please follow these instructions: 1. Call the appropriate phone number listed below for an Authorized Return Number and shipping instructions. 2. Pack the instrument carefully and ship insured parcel to the appropriate location: United States Tyco Healthcare Group LP 98.
PAGE 14
Status: Approved Doc#: AW10002310 Effective Date: nulldate Mounting Base for Wall Reorder No. 500046 Mounting Base for Rolling Stand Reorder No. 500047 Mounting Base with Pole Clamp Reorder No.500048 Rolling Stand Reorder No. 303059 Rolling Stand Basket Reorder No. 8884813711 XIII.