Product Manual

Data Management
2-4 Service Manual
Figure2-2.Remote Connectivity Selections
6. Select Add New Connection and set as follows:
a. SSID: Enter the SSID name of the AP (access point).
b. Encryption: Select the encryption type of the current AP.
c. Encryption Type: Set the password for each encryption type.
d. DHCP: Turn DHCP On or Off. (When On, the IP Address, Subnet Mask, and
Gateway setting are automatically assigned using DHCP.)
e. IP Address: If DHCP is Off, set the IP address of the monitoring system.
f. Subnet Mask: If DHCP is Off, set the subnet mask of the monitoring system.
g. Gateway: If DHCP is Off, set the gateway of the monitoring system.
h. After setting the new connection, select Save Connection to add the settings
to the Wi-Fi Target.