Instruction Manual

ManualsBrandsCOVIDIEN ManualsHealth and hygieneKangaroo™ 924

Kangaroo

™

924

Enteral Feeding Pump

Instructions for Use

 H S

M, MA



...

..

www.covidien.com

COVIDIEN, COVIDIEN with logo and ™ marked brands

are trademarks of Covidien AG or its affiliates.

H-6210-5M-0308

To change rate press “Start/

Hold” and set rate by press-

ing increase/decrease but-

tons on the front panel.

Close roller clamp on pump

set.

Press “Start/Hold”.

Fill or spike feeding bag

prior to setting up pump.

Slowly open clamp and ﬁll

entire line with ﬂuid; leav-

ing a few drops in the drip

chamber.

Close roller clamp.

Load set per arrow diagram

on pump. (Do not over-

stretch tubing.)

Press on and wait while a

system check is performed.

Check “VOL CLR” light or

press ”VOL” then “VOL

CLR” to clear volume, (if

necessary).

Set feed rate using either

increase/decrease buttons or

turning side knob.

Optional Feature - Press

“VTBD” button and set by

either turning the knob or

using the increase/decrease

buttons. (Only use “VTBD”

if you want to stop and

alarm once a set amount of

formula is delivered).

Open the roller clamp.

General Programing Instructions:

Summary of content (1 pages)

PAGE 1
Kangaroo 924 ™ Enteral Feeding Pump Instructions for Use General Programing Instructions: Close roller clamp on pump set. Fill or spike feeding bag prior to setting up pump. Slowly open clamp and fill entire line with fluid; leaving a few drops in the drip chamber. Close roller clamp. Load set per arrow diagram on pump. (Do not overstretch tubing.) Press on and wait while a system check is performed. Check “VOL CLR” light or press ”VOL” then “VOL CLR” to clear volume, (if necessary).