Bidet BA08-AR/AE • This product can not be used if the voltage is different from that mentioned in the rating plate. • For your safety and proper use of the product, please read this User’s Manual before use. • Warranty card is included in this User’s Manual. 1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 1 2009.6.
FEATURES 1. WIDE function Users can select the degree of the cleansing water spreading directly as the wanted step from the strong force of the flowing water to the softly spreading water. 2. Air+ function You can feel more soft and strong cleansing power as it is an air mixed water type. 3.
DEAR CUSTOMERS Coway Thank you for using our Coway Bidet. Please read this User’s Manual to use and maintain the product correctly. If you encounter a problem while using the product, you may solve the problem referring to the User’s Manual. As this manual contains the product warranty card, please keep it in a safe place. For Information How to Use Safety information. . . . . . . . . . . . . . . . . . . . 4 Electrical Safety. . . . . . . . . . . . . . . . . . . . . . . . .
Safety information Be careful to keep this safety information. Please read this information to prevent property loss and ensure your safety. If not observed, serious injury or even death may Danger occur as a result. If not observed, serious physical injury or property Warning damage may occur as a result. If not observed, minor physical injury or property damage Caution may occur as a result. Electrical Safety Do not use a damaged power cord or plug, and loose outlet.
When you don’t use for a long time, close the main water supply valve and unplug. Do not attempt to repair or modify the power cord at your discretion. Otherwise, electric shock or fire may occur as a result. Otherwise, electric shock or fire may occur as a result. In the case the power cord is damaged, do not replace the cord yourself. Call Service Center to have it replaced. Otherwise, electric shock or fire may occur as a result. Installation Safety Do not install near a heating device.
Safety information Operation Safety A/S If the steam cleaner produces a strange noise, flaming smell, or smoke, immediately unplug from the electrical outlet and call our Service Center. Do not insert a wire or sharp object in any gap of the product or the warm air outlet. Otherwise, electric shock, fire, or product damage may occur as a result. Otherwise, electric shock or fire may occur as a result.
Exercise caution not to have urine touch nozzles, air dryer outlet, or outside surface of the product. If the product is not to be used for a long time, pull out the power plug from the electrical outlet, close the main water supply valve, and drain the water in the water tank. Otherwise, bad smell or malfunction may occur as a result.
Parts name Dimensions The toilet dimensions must be within those shown below. Do not install this product on a toilet that does not meet these dimensional requirements. 197.2 mm 400 mm 525 mm (7.76 inch) (15.7 inch) (20.7 inch) Round type 125 mm (5 inch) 375 mm (14.8 inch) 199 mm 402.5 mm 525 mm (7.83 inch) (15.9 inch) (20.7 inch) Elongate type 125 mm (5 inch) Distance of fixing hall 405 mm (15.9 inch) 140 mm ~ 210 mm, 260 mm (5.5 ~ 8.3 inch, 10.
For Information Front Seat cover Nozzle Main water supply pipe PARTS NAME Precautions sticker Bidet seat T-shaped connector Main water supply valve Indication part/ operation part Bidet hose Remote control mount Rear Power cord Product sticker Ș Drain hole Ș Nano silver ceramic MF filter Ș Ș 9 1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 9 2009.6.
Parts name Installation Material 2 fixing screws Bidet hose 2 fixing rubbers T-shaped connector 2 fixing washers Nano silver ceramic MF filter 2 fixing nuts Rubber packing 2 fixing sliders Filter fixing stopper Filer clip 2 batteries (AA size) Screw (Ø 6) Grounding This product must be grounded, in the event of an electrical short circus, ground reduces the risk of electrical hazards by providing an escape wire for the electric current.
For Information KEEP IN MIND Connect the power. Turn on the product by connecting the power plug to the electrical outlet and pressing the power selection button on the control panel. The bidet works normally only when the electricity is connected. Open the main water supply valve. The main water must be supplied to operate the bidet normally. Check whether the product is in power saving mode before use.
KEEP IN MIND Setting/canceling silent mode 1) Turn on the remote control by pressing the power selection button on the remote control with pulling out the power plug, and plug in the power plug with pressing the rear cleansing function selection button of the bidet body (Alarm). 2) Press the stop button on the remote control and select the desired status. - The alarm rings 1 time (ding) : It means the release of the silent mode.
Tips How To Use PREPARATIONS This product is for 120 V~, 60 Hz only. Please connect the power plug to a dedicated grounded electrical outlet for 120 V~, 60 Hz. KEEP IN MIND / PREPARATIONS After installation Check if there is a leak in the main water supply valve and the connection hose. You must insert the rubber packing between the T-shaped connection pipe and the main water supply valve. Periodic filter replacement It is important to replace the filter periodically for the clean rinsing.
Operation/indication part Remote Control Indication Part/Operation Part Indication part Remote control signal transmitting part Operation part 1 Stop button 2 Rear cleansing function selection button 3 WIDE function selection button 4 Air dryer function selection button 1 Nozzle position indicator 2 5 Front cleansing function selection button Seat temperature adjustment indicator 3 4 7 Signal transmitting status indicator 8 Battery status indicator WIDE function indicator Air+ function
How To Use Indication part 1 Remote control signal transmitting part It is the transmitting window that transmits signals when the remote control buttons are pressed. 2 Nozzle position indicator If you press the nozzle position button, the lamp is turned on in 5 steps. When you press the seat temperature adjustment button, you can adjust the indicator (L M H Off ).
Operation/indication part Operation Part 1 Stop button Stops all operating functions. 2 Rear cleansing function selection button Use it to select the desired rear cleansing function. 3 WIDE function selection button Use it if you want to control the water spraying range when you use the cleansing functions. You can select the range of the force of the flowing water of 3 steps in straight line step1 step2 order using WIDE function selection button.
How To Use Product Indication Part/Operation Part Power selection indicator 1 Remote control signal receiving part OPERATION/INDICATION PART Remote control signal receiving part 3 1 Power selection button 2 Rear cleansing function selection button 2 3 Nozzle cleaning button Indication Part 1 Remote control signal receiving part It receives the signals from the remote control. 2 Power selection indicator When the power is turned on, the indicator is lightened.
HOW TO USE For Rear Cleansing Rear cleansing Sit on the seat and press the rear cleansing function selection button on the remote control. The rear cleansing nozzle will remove the cold water remaining - Inside the nozzle before the water stream is ejected so that you can have rear cleansing with water set to a desired temperature. - The cleansing water is ejected for about 1 minute and then automatically stopped.
Front cleansing 3 2 3 1 2 1 Move Press the move function selection button on the remote control. - The nozzle moves back and forth, providing a wider range of cleansing. It will be worked continuously while the cleansing function is operated. You can adjust the nozzle position by pressing the nozzle position button. To stop the move function, press the move function selection button again.
INSTALLATION Installing the product Tighten the fixing nuts firmly so that the bidet body won’t be shaky on the toilet. Product installation place As the bidet should be installed on the toilet, take caution not to have water splashed on the bidet. After installation Keep the removed existing toilet seat in a shaded place to prevent its damage.
Maintenance Uninstallation Existing Toilet Seat 1. Remove the fixing nuts of the existing seat and separate the existing toilet seat 1 and the seat cover 2 . 2 Keep the removed seat and the removed seat cover in a shaded place. INSTALLATION | Uninstallation Existing Toilet seat | Installation the Product 1 Installation the Product 1. Turn off the main water supply valve 1 on the water pipe and separate the existing water tank hose 2 . 2 1 2.
INSTALLATION Installation the Product 5. Push fixing screw into the fixing slider. And slide the fixing slider with fixing screw to be hooked in the installation boad. 6. Insert fixing screw into the holes and pushfixing rubber, fixing washer into the fixing screw to prevent from wobbling of the main body. Then tighten up the fixing nuts. If you do not tighten nuts. It may cause injury or damage to customer. 7. Please connect the bidet hose to the filter fixing stopper.
Maintenance Tips This installation method was explained on the basis of the case installed the remote control mount for the right hand. After removing the fixing screw and separating the product form the toilet, separate and install the remote control mount. INSTALLATION | Installation the Product | Installation the Remote Control Mount Installation the Remote Control Mount 1. Remove the fixing screw (Ø 6) that fixes the remote control mount on the bottom of the bidet. 2.
INSTALLATION Installation the Remote Control Mount 5. Insert the rotating axis in the opposite side after pulling out it from the remote control mount. Insert the axis with the thicker part facing the back of the remote control mount. 6. Insert the cover-axis in the hole on the opposite side of the rotating axis. Align two projections with the two grooves on the axis when inserting the cover-axis. 7. Fix the rotation axis and the cover-axis with a screw. Please tighten the cover-axis firmly.
Maintenance CLEANING METHOD Nozzles Tips INSTALLATION | Installation the Remote Control Mount / CLEANING METHOD | Nozzles | Product Body If excessive force is exerted on the nozzle when cleaning it, the nozzle may not be working properly or be broken. Hold the nozzle lightly to clean it. When you clean the nozzle, the nozzle cleaning water is sprayed (But the nozzle cleaning water doesn’t be sprayed and only nozzle is extended in the feed water stop status). 1.
CLEANING METHOD Uninstallation the product 1. Unplug the power plug from the outlet. 2. Close the main water supply valve. 3. Place a big wash basin (1 L or more) under the rear drain hole of the bidet. 4. Turn the drain stopper to 1 counter clockwise by 90 ° and pull out it in the direction of 2 to remove it. - Please assemble the drain stopper to the product again after draining. 5. Please separate the product by removing the fixing nuts in the fixing screw and lifting the bidet.
Maintenance MAINTENANCE Freezing Protection Function CLEANING METHOD | Uninstallation the Product / MAINTENANCE | Freezing Protection Function Coway bidet has a built-in anti-freezing program. When the water temperature of the water tank falls below 5 ºC, the heater automatically operates to prevent freezing burst. Check that the power is turned on. If the power is turned off, the anti-freezing program does not work and the bidet may have freezing burst or malfunctions in a cold environment.
FILTER REPLACEMENT METHOD 1. Please pull out the power plug and turn off the main water supply valve. 2. Separate the MF filter from the filter holder by rotating the MF filter to replace to the arrow direction. 3. Please rotate and insert new MF filter to the filter holder like the next arrow direction to the end not to be shaken. 4. Use it after opening the main water supply valve and plugging in the power cord. 28 1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 28 2009.6.
Maintenance TROUBLESHOOTING The bidet may operate abnormally due to the minor causes not because of the product malfunction but because of the fact that the user is not familiar with the product use. In such a case, problems can be solved easily even without the help from the Service Center by checking the following items. If you can’t solve the problem after checking the following items, please call the Service Center. Check Is the power plug connected to the electrical outlet? Plug in the power cord.
TROUBLESHOOTING Symptom The air from the air dryer is cold. Water leaks in areas other than the nozzles. Water comes out while the bidet is not in use. If you plug in the power cord, the rear cleansing nozzle come out and go in. There is a noise coming from the bidet. Tips Check Measures to take • Isn’t the air dryer temperature adjustment button set to “OFF” status? Please adjust as the proper temperature by pressing the air dryer temperature adjustment button.
SPECIFICATION Product name BA08-AR/AE Power rating 120 V~, 60 Hz Power consumption 850 W Water pressure 0.11 MPa - 0.68 MPa 525 mm (W) X 500 mm (D) X 142 mm (H) BA08-AE 525 mm (W) X 530 mm (D) X 142 mm (H) Weight (NET) Warm water cleansing device Warm air dryer Warm seat MF filter Accessories 5.7 kg - 6.3 kg Rear cleansing Maximum 0.7 L/min, automatic nozzle cleaning function Front cleansing Maximum 0.
MEMO 32 1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 32 2009.6.
MEMO Others MEMO 33 1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 33 2009.6.
WARRANTY CARD OR WARRANTY LETTER ONE YEAR LIMITED WARRANTY BIDET BA08-AR/AE (“PRODUCT”) Model : Serial Number : Customer Name : Date of Purchase : (“OWNER”) What This Warranty Covers : Limitations and Exclusions : Commencing with the date of purchase of the Product and continuing for a period of one year, if manufacturing defects in the Product cause the Product to not operate properly for its intended use, then subject to the exclusions, conditions, and limitations contained herein, COWAY at its sole o
Others Waiver : Any implied warranty of merchantability or fitness for a particular purpose or use, shall be limited to the duration of the foregoing express written warranty. COWAY’s failure at any time to enforce or rely upon any of the terms or conditions stated herein shall not be construed to be a waiver of its rights hereunder.
http://www.coway.com MADE IN KOREA 003 1021214 1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 36 2009.6.
