Installation Guide

EN
03 Maintenance
Remove existing toilet seat
Install product
NOTE
As the bidet should be installed on the toilet, ensure that water is not splashed onto the bidet.


Remove the existing toilet seat ❶ and
seat cover ❷ by removing the fixing nuts.
Turn off the main water supply valve ❶ and
separate the existing water tank hose ❷.
1
2
1
2
NOTE
Keep the removed toilet seat in a shaded location to
prevent it from being damaged.
󾖻
Connect the rubber packing, 3/8” T-shaped
connector and water tank hose in this order
to the existing 3/8” water pipe. 
Please connect the bidet hose to the T-shaped
connector.
If your T-shaped connector does not fit to
your bathroom water pipe because the size
is ½”, please use ½” conversion bolt and nut
after connecting them to the 3/8” T-shaped
connector as you can see in the image.










󽗉

Bidet hose
Water pipe
Water tank
hose
T-shaped
connector
Conversion nut
(with packing)
T-shaped connector
(with packing)
Conversion bolt
(with packing)
31