Installation Guide

Installation
Install remote controller

Before attaching the bracket, thoroughly wipe
the attachment areas with a dry cloth.




Attach the bracket onto the wall and press
the middle area with hands for more than 10
seconds.






Depending on the wall type, you can install using
the supplied screws and anchor mounts or use
the provided double stick tape on the back of the
remote wall mount.
Make sure the remote mount is fully secured with
either method so that it does not fall and damage
the remote control.
NOTE
If the anchors are not mounted, remote controller
bracket may fall from the wall.
NOTE
- If the anchor bolts are not mounted, remote
controller and bracket may fall from the wall.
- Any caused damage by not using bolts corresponds
to users’ responsibility, not product defect.
34
03 MAINTENANCE