Specifications

PRODUCT INSTALLATION

■ Cleaning the Neo Sense filter 8 inch (S) (for installation and replacement):

Clean the Neo Sense filter 8 inch (S) for about 30 seconds.

■ Cleaning the Post Carbon block filter 8 inch (S) (for installation and replacement):

Clean the Post Carbon block filter 8 inch (S) for about 3 minutes.

For initial installation, flush the Post Carbon block filter 8 inch (S) before installing it.

(Flushing the Post Carbon block filter 8 inch (S) during the initial installation minimizes the inflow of

fine particles into the water tank.)

■ Cleaning the Neo Sense filter and Post Carbon block filter

Remove the tubing from the bottom of the Neo Sense filter 8 inch (S).

Connect the Post Carbon block filter 8 inch (S) to the bottom of the Neo Sense filter 8 inch (S).

Clean the Post Carbon block filter 8 inch (S) with the water coming from the Neo Sense filter

8 inch (S) for about 3 minutes. (Water flow rate 300~500 ㎖ /min)

Separate the Post Carbon block filter 8 inch (S) from the Neo Sense filter 8 inch (S) and then

connect it to the bottom of the Membrane filter (RO) 8 inch.

1. Precautions on installation

Installation Method

Installing the Product

Inlet tubing (Orange)

Cooling stopper

Outlet tubing (Blue)

Main water supply

valve