Water Filtration Device CP-07BLO • This product can not be used if the voltage is different from that mentioned in the rating plate. • For your safety and proper use of the product, please read this User’s Manual before use. • Warranty card is included in this User’s Manual.
FEATURES 1. Power saving mode using the light sensor If you press the “SAVE” button, as it decreases the driving times of the motor at night automatically, the amount of the power consumption is decreased. Power saving mode 2. Faucet pollution prevention It protects the cold water/the room water faucet from the external pollution using the faucet cover. Faucet pollution prevention 3.
DEAR CUSTOMERS Coway FEATURES / CONTENTS Thank you for using our Coway Water Filtration Device. Please read this Users’ Manual to use and maintain the product correctly. If you encounter a problem while using the product, you may solve the problem referring to the User’s Manual. As this manual contains the product warranty card, please keep it in a safe place. This system conforms to NSF/ANSI 42 for aesthetic chlorine and NSF/ANSI 53 for VOC as verified and substantiated by test data.
SAFETY INFORMATION Be careful to keep this safety information. Please read this information to prevent property loss and ensure your safety. If not observed, serious injury or even death could Danger occur. If not observed, serious injury or property damage Warning could occur. Caution If not observed, slight injury or property damage could occur. Electricity safety Do not use a damaged power cord or plug, and loose outlet. Otherwise, electric shock or fire may occur as a result.
Otherwise, electric shock or fire may occur as a result. Do not plug into an outlet that is being used by several other appliances. Use an electrical outlet dedicated. When you don’t use for a long time, close the main water supply valve and unplug. Otherwise, electric shock or fire may occur as a result. Do not attempt to repair or modify the power cord at your discretion. Otherwise, electric shock or fire may occur as a result. In the case the power cord is damaged, do not replace the cord yourself.
SAFETY INFORMATION If not observed, serious injury or even death could Danger occur. If not observed, serious injury or property damage Warning could occur. Caution If not observed, slight injury or property damage could occur. Operation safety When the water is coming inside of the product or there is a puddle on the product, call Service Center after closing the supplying valve and unplugging.
Others Clean after unplugging. Otherwise, electric shock or fire may occur as a result. Do not clean by spraying the water directly or don’t wipe the product using the benzene and thinner. Do not repair, disassemble, or modify. Otherwise, electric shock or product damage may occur as a result. After moving the product or replacing the inno-sense filter, the black powder can be remained in the inner bottom of the water tank.
PARTS NAME Front Indication part/ Operation part Room water extraction faucet Cold water extraction faucet Cup-touch lever Gutter Rear Cooling Stopper Radiator Power cord Outlet(Blue) Inlet(Orange) 7
The filter is the core technology of the filtration system. If you don’t use qualifying filter or if you use an old filter that has expired, the system performance may degrade. For Information WATER FILTRATION PROCESS The 5-step water filtering system (CP-07BLO) This neo-sense filter has the function to reduce aesthetic chlorine, odor, volatile organic compounds(VOC’s).
Installation precautions The summary for the proper installation of the water filtration device 1. Close main water supply valve to separate the faucet. 2. Wind the teflon tape on the adaptor and fit it to the pipe. Do not turn the water pipe. 3. Connect the faucet with the adaptor. Shall install the adaptor with connector on the cold water pipe. 4. Connect 1/4 inch orange tubing with the connector on the adaptor. F lush water through each filter at least 5 minutes before Connection. 5.
This product is for 120 V 60 Hz only. Please connect the power plug to a dedicated grounded electrical outlet for 120 V 60 Hz. The water filtration device works normally only when the electricity is connected. The main water must be supplied to operate the water filtration device normally. • After installing the product Get rid of the saved water above the full water in the inner water tank 2 times or more to use.
OPERATION / INDICATION PART Indication part/Operation part Indication part Operation part 1 Cold water mode indicator 7 Power indicator 6 Light sensor 5 Power saving mode indicator 1 Cold water mode selection button 2 Power saving mode selection button 2 Cold water temperature indicator 3 Room water mode indicator 1 Cold water mode indicator ater level 4 W indicator 2 When you select cold water mode, the indicator is turned on.
How to Use Operation part Cold water mode selection button When you want to select / deselect cold water mode, use it. 2 Power saving mode selection button When you want to select / deselect power saving mode, use it. OPERATION / INDICATION PART 1 To use the cold water mode Press the “COLD” in the right of the control button and check if the cold water mode indicator in the indication part is turned on. If you want to turn off the cold water mode, press the selection button once more.
HOW TO USE To drink the cold water Please push the cup-touch lever in the cold water faucet. Tips If the cold water doesn’t come from the water filtration device, check if the cold water mode indicator in the indication part is turned on (See P.12). To drink the room water Please push the cup-touch lever in the room water faucet.
INSTALLATION How to Use Follow the instruction for installation Main water supply valve 1 cooling stopper Connect the orange color inlet tubing 1 to the tap water supplying pipe. Connecting the outlet tubing 2 .
INSTALLATION Be cautious! Water filtration device installation place 1 Please install the water filtration system not at a rough place, a damp place, a place where the unit is exposed to the direct sunlight, a place where dust is present, or a place that the water drops. Water filtration device installation place 2 Please install at the place where it is 10 cm or more off from the wall and the bottom is flat and firm.
Storage tank 1. Unplug the power cord. Close the main water supply valve. Please drain both the cold water and the room water using the same method. 3. Open the upper cover of the product and open the storage tank cover. INSTALLATION / CLEANING METHOD | Storage tank 2. Please drain and take the water inside of the water filtration device completely using the draining hose. Maintenance CLEANING METHOD 4.
CLEANING METHOD 5. Please wipe the surface of the storage tank with soft clothes. 6. Use the storage tank after cleaning it with the taken water, draining completely using the draining hose, and emptying the newly room water one time or more. 7. Close the storage tank cover after rotating and equipping the ceramic filter in the cold water/room water separation board. 8. Open the main water supply valve after closing the upper cover and plugging the power cord.
1. Gutter separation method The gutter can be separated easily with lifting up the front part of the gutter and taking out. CLEANING METHOD | Storage tank | Gutter Gutter Maintenance Tips Close the storage tank cover completely. A worm or a foreign body can be entered. When you clean the storage tank, don’t use the medicine or the detergent. If you don’t clean the medicine or the detergent cleanly, it can be harmful to the body.
FILTER REPLACEMENT Filter The life of the water filtration system is the filter. It it isn’t the legitimated filter or you use too long even if it is the legitimated filter, the filter performance can be lowered. Please change to the legitimated filter according to the replacement cycle. Filter replacement cycle If the filter is not regularly replaced, it may degrade the water quality from the product.
1. Close the main water supply valve after unplugging the power cord, and drain the water inside of the water filtration device (See P.16). 3. Please lift the cup-touch lever up after closing the faucet using the faucet cap. Tips FILTER REPLACEMENT / FILTER REPLACEMENT METHOD 2. Open the upper cover and separate the gutter in the front side. Maintenance FILTER REPLACEMENT METHOD A s the water can be remained inside of the water filtration device, please be sure to close using the faucet cap.
FILTER REPLACEMENT METHOD 4. After releasing 2 fixed screw in the upper side of the product using the driver, pulling forward with grasping the upper side of the front cover. 5. After separating the fitting connected to the filter trying to replace, please replace the filter. (Separate the fitting using the proper tool.) Tips By changing the filter and connecting the fitting and the hose precisely, check that there is no leakage and drain the first filtered water necessarily. 6.
The water filtration device may operate abnormally due to minor causes not because of the product malfunction but because of the fact that the user is not familiar with the product use. In such a case, problems can be solved easily even without the help from the Service Center by checking the following items. If you can’t solve the problem after checking the following items, please call the Service Center. The water tastes weird. The water doesn’t come. The water is flowing slower.
SPECIFICATION Product CP-07BLO Model Filtration Method Power Supply Tank Capacity Cold Water 3.0 L Total 8.3 L • 23 320 mm(W) × 560 mm(D) × 500 mm(H) 5 °C - 35 °C Production Rate 76 L/d (25 °C, 138 kPa) Working Pressure 138 kPa – 827 kPa Net Weight • 120 V~ 60 Hz 5.3 L Working Temperature • RO(Reverse Osmosis) Room Water Dimension • Water Filtration Device 17.4 kg The water amount can be differentiated according to the water pressure and the water temperature.
WATER FLOW DIAGRAM Others CP-07BLO SPECIFICATION / WATER FLOW DIAGRAM 24
Water Filtration System Performance Data Sheet Brand: Lyon II Model: CP-07BLO This system has been tested and certified by the Water Quality Association according to NSF/ANSI 42, 53, and 58 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42, 53, and 58. Substance Max.
Type Usable period (months) COST US $ WJNF8-S NEO-SENSE FILTER 6 7.84 WJMF8-20-S RO MEMBRANE FILTER 20 60.92 WJIF8 –S INNO SENSE FILTER 18 9.40 WJCC-02 CERAMIC FILTER 12 3.6 PERFORMANCE DATA SHEET | CP-07BLO Model of Filter Others • For parts and service availability, please contact your local dealer or Coway.
* VOC Surrogate Claims alachlor Drinking water regulatory level1 (MCL/MAC) mg/L 0.002 Influent challenge concentration2 mg/L 0.050 Chemical reduction percent > 98 Maximum product water concentration mg/L 0.0013 atrazine 0.003 0.100 > 97 0.0033 benzene 0.005 0.081 > 99 0.0013 carbofuran 0.04 0.190 > 99 0.0013 carbon tetrachloride 0.005 0.078 98 0.00184 chlorobenzene 0.1 0.077 > 99 0.0013 chloropicrin - 0.015 99 0.00023 2,4-D 0.07 0.110 98 0.
State of California Department of Public Health Water Treatment Device Certificate Number 08 - 1934 Replacement Element(s) Woongjin Coway Co.
WARRANTY CARD OR WARRANTY LETTER ONE YEAR LIMITED WARRANTY WATER FIRTRATION DEVICE CP-07BLO (“PRODUCT”) Model: Serial Number: Customer Name: Date of Purchase: What This Warranty Covers: Limitations and Exclusions: Commencing with the date of purchase of the Product and continuing for a period of one year, if manufacturing defects in the Product cause the Product to not operate properly for its intended use, then subject to the exclusions, conditions, and limitations contained herein, COWAY at its sole opt
COWAY’s failure at any time to enforce or rely upon any of the terms or conditions stated herein shall not be construed to be a waiver of its rights hereunder.
http://www.coway.
