Operation Manual
12
COWON AK1
1. Insert the memory card into the device.
2. Place the AK1 in the device holder.
3. Remove the release paper on the tape.
4. Choose the location where you want to attach
the device to the vehicle. Wipe any foreign matter
or moisture completely from the location before
installing the device.
5. Connect cigar jack cable.
6. Adjust the direction of the camera lens.
7. Tighten the nut of bracket to x the AK1.
* A space behind the rearview mirror is recommended for installation.
* Select a location carefully as repositioning the device after removing may weaken adhesiveness signicantly. Double-check
the chosen location before xing the device.
* Adjust the camera lens so that about 10-20% of your vehicle's hood appears on the recording screen.
1
2
3
4
5
6
Select a location
and install
Before You Start
+ Installation