Operation Manual
14
COWON AW2
No. Names Functions
1 Power terminal
Cigar jack cable / Uninterruptible power cable
terminal
2
Rear view camera
terminal
Connects with the rear view camera.
1)
3 Camera lens Records the front direction of a vehicle.
4 Buttons
2)
Press once - Turns on/off sound
recording (Default setting),
or used for manual recording
when an event occurs
3)
Press twice - Wi-Fi On/Off
Press three times - Connects to Remote
Monitoring
4)
Press and hold for 3 seconds - Allows safe
removal/
formatting
of memory
card
5)
5 Microphone A microphone for sound recording
6 Memory card slot Slot for inserting or removing a memory card.
7 Rear lid Use it to insert or remove memory card.
8 LED status indicator Displays the operational status of the device
9 Speaker Plays voice guides and sound effects.
1
2
3
4
5
8
6
7
9
1)
This terminal is designed to fit AW2 rear view camera only;
it is not compatible with other devices.
2)
When pressing the button, the front and rear view cameras are synchronized and perform the same task.
(Safe Removal/Formatting is performed separately)
3)
Go to Settings > Sound > Sound Recording and deselect Sound Recording by Button to switch to Event
occurence.
4)
Select Settings > Device > Remote Monitoring > Use Remote Monitoring Connection to activate the remote
monitoring connection.
5)
Press and hold the button for more than 3 seconds, and then press and hold it for more than 3 seconds again
to format the memory card.
Before You Start!
+ Names of Parts and Functions
Front view camera
Front product
holder