Operation Manual

30
COWON AW2
+ Front and Rear View Recording Synchronization
Other Functions
- Items like le name, recording le save cycle, parking voltage, and termination voltage are determined by the front
view camera setting.
- Wi-Fi On/Off, Remote Monitoring On/Off, and Sound Recording by Button On/Off are always applied to both the front
and rear View cameras.
+ Setting Parking Mode Voltage
Parking mode voltage can be set through the Smart Manager and the PC Manager.
* Go to Settings → Recording → Set voltage
- Set the voltage value lower if the device goes into parking mode recording while driving.
- Set the voltage value higher if the device does not automatically go into parking mode recording while parked.
- If the output voltage of vehicle battery is higher or lower than the parking voltage setting range, then go
to Settings → Record Setting → Parking Recording and turn off Use Parking Voltage. Afterward, the device
detects the movement of the vehicle to start the parking recording.
+ Auto Shutdown Timer
After parking recording commences, the device operates for a pre-set time, after which the power is turned off
automatically.
Auto Shutdown Timer can be set through the Smart Manager and the PC Manager.
* Go to Settings → Recording → Auto Shutdown Timer
In the ordinary recording status, the front and rear view cameras are synchronized by the front view camera
setting.
If one of the cameras stops recording due to high temperature protection or safe removal of memory card, then
the other camera autonomously runs by its own setting.