Operation Manual

31
COWON AW2
+ Setting Auto Shutdown Voltage
Other Functions
When battery voltage falls below the pre-set voltage value after going into parking mode recording,
power is turned off automatically to protect the battery.
Shutdown voltage value can be set through Smart Manager and PC Manager.
* Go to Settings → Recording → Setting Voltage
- When standby operation time becomes shorter in parking mode recording, set the range of auto
shutdown voltage lower.
- The lower the pre-set voltage value, the longer the standby time in parking mode recording, and the
higher the pre-set voltage value, the shorter the standby time in parking mode recording.
- If voltage falls below the pre-set auto shutdown voltage value during operation while auto shutdown
timer is set, power is turned off regardless of the auto shutdown timer.
- If you do not wish to use the auto termination voltage setting feature, then go to Settings →
Record Setting → Parking Recording and turn off Termination Voltage. If the auto termination
voltage setting feature is not in use, then the vehicle battery may be discharged. This may
result in a faulty ignition start or engine stop. It is recommended to only use this feature when
absolutely necessary.
* Parking mode recording, auto parking mode voltage, and auto shutdown voltage settings are accessible only
during uninterruptible power connection.
* The lower the pre-set auto shutdown voltage value, the greater the risk of battery discharge; the higher the
pre-set auto shutdown voltage value, the more effective it is for preventing battery discharge.
Set the voltage value to suit your vehicle battery condition before use.