ver. 1.
COWON CR1 Safety Precautions Before Using the Product Information in this section is provided for the safety of the user through proper usage of the product. So please read thoroughly before using the product. COWON will not be responsible for any damages or injuries caused to your car, your device, or yourself due to the installation or use of the product.
COWON CR1 3 Navigator Cradle 1 2 4 5 6 7 8 9 3 10 11 1 GPS Antenna : SRIF III Internal GPS antenna for receiving satellite data. 2 FM Transmitter Switch : Sets FMT channel. FMT (FM Transmission) function allows playback of the sound through the vehicle’s radio via FM transmission when the FM radio is set to the same frequency. 3 I/O Connection Terminal : Connection port for connecting COWON Q5W. 4 Volume : Adjust the cradle speaker volume.
COWON CR1 Remote Keys for Navigator Up Movie Mode Music Mode Power Mute Navigator Mode Play/Pause Next Menu Previous Fast Forward (FF) Zoom In Rewind (REW) Left Zoom Out Right Enter Adjust Caption Timing Volume Down Add Bookmark Go to Bookmark Sleep Move Focus Show File List Close Current Mode Pan Scan LCD off - Please refer to Q5W manual for full function of the remote - The remote is included in Q5W Package Windshield suction mount Lock ① ③ ② Push COWON CR1 Push
COWON CR1 5 1. Install the mount head of the windshield suction pedestal to the mounting hole of the cradle. 2. Please make sure to wipe all foreign material off the window. 3. Push the pedestal suction cup firmly to the windshield, then flip the number 1 lever down to secure the suction cup. 4. Use the number 2 and 3 knobs to adjust the angle and rotation of the pedestal to provide the best visibility. 5. Press and release the front of the cradle to release the cradle part for the COWON Q5W. 6.
COWON CR1 1. Please make sure to wipe all foreign material off the connector and dashboard. 2. Remove the cover of adhesive tape and affix the connector to the dashboard. 3. Install the mount head of the pedestal to the mounting hole of the cradle. 4. Push the pedestal suction cup firmly to connector, then flip the number 1 lever down to secure the suction cup. 5. Use the number 2 and 3 knobs to adjust the angle and rotation of the pedestal to provide the best visibility. 6.
COWON CR1 7 Additional Explanation ▶Product Specification COWON Q5W - Cradle Navigation Map Tele Atlas GPS Receiver SIRF III CHIP Supply Voltage DC 12 ~ 24V Charging Current 3A (MAX) Charging Voltage 5V Frequency Scope 3 Channel : 88.1 / 88.5 / 88.9 Mhz Speaker Output FUSE 6W Stereo Speaker : 3W(Left) + 3W(Right) 250V (3A) ▶GPS Navigation Software (NavMate) Updates GPS navigation software is provided on DVD, and updating it further enhances system stability and feature sets.
COWON CR1 ▶Activation Process After installing the NavMate navigation software on your device, please go to the following web site to obtain the code to activate the software: “http://www.horizonnav.com/activation/cowon” User name: cowon Password: 3r4t56 Voucher code is attached on the back of the cradle. For support, call 186 NAVMATE1 (1.866.286.2831). Voucher code will not be reissued if lost. Product return, activation and/or other services may not be provided without voucher code.