Operation Manual

12
COWON D20
+ Connecting and Disconnecting the PC
Before you start!
1. Use the USB cable to connect COWON D20 to the PC.
2. COWON D20 displays the USB connected image if properly connected to the PC.
3. Also make sure to check My Computer or Windows Explorer to see if COWON D20 is properly
connected to the PC.
4. Copy desired video, music, or other les to COWON D20.
5. When done, click the icon on the system tray to safely remove COWON D20 from the PC.
6. Click the popup message.
7. Safely remove the hardware and disconnect the USB cable.
- Number of les and folders recognizable
COWON D20: up to 12,000 folders / 12,000 les (music / video le: 8,000 + others: 4,000).
MicroSD card : up to 12,000 folders / 12,000 les (music / video le: 8,000 + others: 4,000).
- Disconnect the product after performing “Safely Remove Hardware” function.
- The following message may appear randomly, but it does not indicate that the product is
malfunctioning. Please try again.
- If your operating system does not display the ‘Safe To Remove Hardware’ window,
disconnect the player after all transfer operations are completed.
- Only simple le transfer operation is available for Linux and Mac OS.
- <For MAC OS users>
EJECT’ procedure must be performed before removing the device from the PC.