USER GUIDE
COPYRIGHT NOTICE General • iAUDIO is the registered trademark of COWON SYSTEMS, Inc. • This product is for home use only and cannot be used for business purposes. • COWON SYSTEMS, Inc. has the exclusive copyright for this User Guide. It is prohibited to distribute this User Guide in part or in whole without permission. • COWON SYSTEMS, Inc. has the copyrights for JetShell and JetAudio. It is prohibited to distribute or commercially use them without written permission from COWON SYSTEMS, Inc.
Precautions Never use the product for other purposes than those described in this guide. Do not leave the product in an extremely hot or humid place. The warranty will be voided if this happens. Pay attention to the USB cable direction when connecting the product to PC. The PC or the product may be damaged if you connect the USB cable in the wrong direction. Never use damaged or worn USB cable. Take special attention when touching the product box, user’s manual and accessories to avoid cuts.
Precautions Do not use the product near water. Do not touch this product with wet hands. Note that malfunctions may occur if you use the product in places where static electricity occurs frequently. Use only the AC Power adapter and USB cable supplied by COWON Systems with this product. 5 Avoid using the player at high volume. Hearing experts advise against continuous, loud and extended play. Be sure to back up your data files. The files on the player may be deleted while using the product.
Table of Contents 1. iAUDIO What you can do with iAUDIO Package components Features Specifications Name of Parts Charging iAUDIO / Connecting USB Cable LCD Display Basic Operations Advanced Operations Troubleshooting Using buttons 8 10 11 12 13 14 15 16 28 41 43 2.
Table of Contents Converting Audio CD to MP3 Files and Downloading Other Features Installing and Using JetAudio 60 63 66 LDB Manger - Automatic Lyric Search and Display 33 Guide to Firmware Upgrade 67 FCC Statement 74 Warranty / Technical Support 75 7 iAUDIO U2
What you can do with iAUDIO What you can do with iAUDIO iAUDIO is a portable digital music player produced by COWON Systems, Inc. You can easily transfer digital music files from your computer to iAUDIO, and carry it anywhere to enjoy. It also supports FM radio listening/recording, as well as voice recording and direct encoding through builtin microphone and Line-In input jack. Enjoy 20 hours of playback with built-in rechargeable battery.
What you can do with iAUDIO 9 Customize your iAUDIO with wide graphic LCD The wide LCD with 128 x 64 dots displays four lines of information and supports most international characters including Korean, Japanese, and Chinese using embedded fonts. You can easily check the overall operations of the product at a glance. Design your logo or download logos from our web site, and download it to iAUDIO to customize the start-up image.
Package components AC Adapter (Option) iAUDIO U2 Earphones User Guide and Installation CD (JetShell JetAudio) Necklace Carrying Case Simple USB Connectior iAUDIO USB Cable, Line-in Recording Cable
Features 11 MP3, MP2, WMA, ASF, WAV (up to 48KHz Stereo) Playback, Voice Recording, FM Tuner and FM Recording, Direct MP3 Encoding , USB Flash Drive Built-in Flash Memory (128MB/256MB/512MB/1GB) 4 Lines of Wide Graphic LCD USB 2.
Specifications Playback Format Memory PC interface Power Charging time Button Switch Display SNR Output Frequency Range Size Weight All ranges of MPEG 1/2/2.5 layer 3 (8kbps~320kbps) (8kHz~48kHz) and VBR All ranges of WMA (20kbps~192kbps) (8kHz~48khz) All ranges of WMA9 CBR(5Kbps Mono~320Kbps Stereo) and VBR (48Kbps ~ 256Kbps)* WAV (Up to 48KHz Stereo) 128MB/256MB/512MB/1GB** USB 2.0 (Up to 20Mbps) Built-in Lithium-polymer rechargeable battery Normal charging (2 hours), Slow charging (6.
Name of Parts 13 Top Earphone Jack Line-in Jack Left Right Front Rear MIC LCD display REC/A B button PLAY/PAUSE Power On/Off (REW) Previous Track, Rewind -(VOL-) Reduce volume, Move cursor down, Reduce the setting value. Reset (FF) Next Track, Fast Forward + (VOL +) Increase volume, Move cursor up, Increase the setting value. Hold Switch Lever (Menu/Navigator) Enter the Menu/Navigator.
Charging iAUDIO / Connecting USB Cable Charging iAUDIO iAUDIO can be charged with optional AC Adapter or by connecting to PC with USB cable. Connect the AC Adapter to iAUDIO as in the figure on the left. If iAUDIO was OFF when the AC adapter is connected, LCD displays figure A while charging, and figure B when the charge is completed. A. During charging B.
LCD Display 15 Album Name Music Information Progress Bar Current Track / Total Track L/R Output JetEffect (BBE, M3B, 3D, MP) EQ Mode Play Mode Battery Hold Mode The battery level icon indicates how much longer the battery can be used. Level decreases as battery is used. When the battery is low, the battery icon starts blinking. If this happens, charge iAUDIO as soon as possible. When a tag (ID3V2, ID3V1) is available, the icon is changed to Disk and the Artist + Album information is displayed.
Basic Operations Power On/Off, Connecting USB Basic Operations 1. Power On/Off • Press and hold PLAY until the “iAUDIO” logo appears and the power comes on. • Press and hold PLAY again to turn it off (power cannot be turned off during recording or in the USB mode). • If the AC adapter was connected when you turn it off, the charge window is displayed and iAUDIO goes into Charge mode. • To use iAUDIO again in the Charge mode, press and hold PLAY again.
Basic Operations Switching Mode 17 3. Switching Mode: There are 4 modes: Digital Audio, FM Radio, Voice Recorder, Line-in Recorder. Example: Switching from “Digital Audio” to “FM Radio” mode. Menu Mode JetEffect PlayMode Mode MP3 Player FM Radio Voice Recorder Mode MP3 Player FM Radio Voice Recorder Digital Audio mode Enter Menu Enter the Menu by pressing the lever. Enter to Mode Menu Select Mode, then press the lever or move the lever to the .
Basic Operations Using Menu 4. Using Menu Example: Chaning the equalizer from NOR (Normal) to ROC (Rock). Menu Mode JetEffect PlayMode Menu Mode JetEffect PlayMode Menu Mode JetEffect PlayMode Digital Audio mode Enter the Menu. Enter the Menu by pressing the lever. Moving selection bar. Selecting a menu. Move selection bar by moving Press the lever or move it to the the lever to the (+), (-) . Opening Menu. • Press the lever to open the menu Screen. Moving selection bar.
Basic Operations Using Menu JetEffect Equalizer BBE Mach3Bass Selecting a menu. Select Equalizer menu. USR 0 0 0 0 0 +19 +12 0 +12 +24 NOR NOR ROC ROC JAZ Changing EQ mode. Move the lever (+), (-) to change EQ mode . 19 Exit after selecting EQ. Press the lever or the Play button. Adjusting the levels of each bands. You can adjust levels of eq bands by moving the lever to . Canceling the Menu Setup, Closing Menu.
Basic Operations Using Navigator 6. Using Navigator Example: Choosing and playing “01.MP3” file in the b-2 folder when iAUDIO folder structure is as follows. iAUDIO A B C iAUDIO A B C B b-1 b-2 Folder structure within iAUDIO. Enter the Navigator. Press and hold the lever to enter the Navigator. Moving selection bar. Move the lever (+), (-) . Changing the Navigation Mode. Press and hold the lever in navigator to change the Navigation Mode.
Basic usage Using Navigator 21 Opening Navigator. • Press and hold the lever to activate Navigator. • The Navigator opens and you can search folders/files in the HDD when in the Digital Audio, Voice Recorder, Line-in Recorder Mode. • In the FM Radio Mode, the navigator opens to search for or setup presets. Moving selection. • Move the lever (+), (-) to move the selection bar up or down. • Press the Play button or move the lever to move to the sub folder. • Move the lever to move to the upper folder.
Basic Operations MP3 Player Mode MP3 Player Mode 1. Power On / Play • Press and hold the Play button. iAUDIO logo appears and power turns on. • If AutoPlay is set to “ON”, play starts as soon as iAUDIO powers on. Otherwise, iAUDIO is on standby. In the latter case, press the PLAY button to play music. • If the Resume feature is set, iAUDIO plays from the last stopped position. 2. Power Off / Stop • Press and hold the Play button when in stop mode to turn if off.
Basic Operations MP3 Player Mode 4. Section Repeat : A 23 B Use the REC (A B) button while a track is played in MP3 Player Mode. The (A ) icon is displayed on the lower center part of the LCD when the key is pressed at the beginning position of the desired section of music. The icon changes to (A B) if the button is pressed once again at the end of the desired section. Now this section is played repeatedly in a loop. To stop Section Repeat, press the REC Button again. 5.
Basic Operations FM Radio Mode FM Radio (Listening to FM Radio) Mode MP3 Player FM Radio Voice Recorder After turning iAUDIO ON, press the lever and select Mode, then select FM Radio in the Mode Menu. Press the lever again or the PLAY button to change to FM Radio mode. Move the lever to , to change frequency by 0.1 Mhz. To seek nearest channel with the best reception automatically, move and hold the lever to , . Press the REC button to record FM broadcast.
Basic Operations Voice Recorder Mode 25 Voice Recorder (Voice Recording with Built-in MIC) Mode MP3 Player FM Radio Voice Recorder After turning iAUDIO ON, press the lever and select Mode, then select Voice Recorder in the Mode Menu. Press the lever again or the PLAY button to change to Voice Recorder mode. Press the REC Button to start recording. Voice is recorded in the preset recording quality under the “RECORDS\VOICE” folder. For details on setting the recording quality, see page 37 in this guide.
Basic Operations Line-in Recorder Mode Line-in Recorder (Direct Encoding) Mode FM Radio Voice Recorder Line-in Recorder After turning iAUDIO ON, press the lever and select Mode, then select Linein Recorder in the Mode Menu. Press the lever again or the PLAY button to change to Line-in Recorder mode. Connect the headphone jack of the CD player (or any other audio device) to the Line-in jack of iAUDIO with a included two-way stereo cable.
Basic Operations Line-in Recorder Mode 27 Press the REC button to set iAUDIO to Waiting status. At this time, iAUDIO does not start recording, and monitors the incoming signal. Recording will start automatically when audio signal is detected. Start playback of CD player. iAUDIO starts recording automatically. The sound from CD player is recorded in the preset recording quality under the “RECORDS\LINEIN” folder. For details on setting the recording quality, see page 37 in this guide.
Advanced Operations JetEffect JetEffect 1. Equalizer Press the lever in MP3 Player mode, then select JetEffect to open JetEffect menu. +19 +12 0 +12 +24 NOR ROC JAZ 2. BBE: Select Equalizer, then choose one of the predefined EQ settings using the lever. The EQ settings are adjustable by the user. To adjust the dB level of each band, select the desired EQ and then move the lever . You can adjust the level by moving the lever (+), (-).
Advanced Operations JetEffect 29 5. 3D Surround: 3D Surround Level 5 6. Pan (L/R Balance) Pan Level 0 3D Surround creates an authentic and exciting 3D effect. You can turn this off or select a level between 1 and 10. Pan is the feature to adjust the balance between left and right sound volumes. You can select a level between -20 and +20 from left to right.
Advanced Operations Play Mode Play Mode 1. Boundary Press the lever to open menu, then select Play Mode to open Play Mode menu. You can choose which files are played from this menu. Select Boundary, then press the lever to change the values as follows: • 1 (one): Only one file is played. F (Folder): Only the current folder is played. • A (All): All files are played regardless of the folder. However, the recorded files in the “RECORDS” folder are excluded.
Advanced Operations Display 31 Display 1. Lyrics Lyrics On • You can change Lyric display mode from this menu. • On: Lyric is displayed if MP3 file contains lyric information. • Off: Lyric is not displayed even if MP3 file contains lyrics. • Use LDB Manager to insert lyric information in MP3 files. 2. Play Time Play Time Elapse Remain • Choose how to display the time information of current track. • Elapse: The elapsed time is displayed (E.g.: 0.10). • Remain: The remaining time is displayed (E.g.: -3.32).
Advanced Operations Display 5. Page Sliding (Menu Animation Effect) Page Sliding Off Fast Normal • Adjust the sliding speed when you open/close menus. • You can choose: Fast, Normal or Smooth. 6. Language Language Chinese(simpli.. Chinese(tradi..) English • Choose the language you want to display for file information such as title, artist and file name. • Chinese (Simplified), Chinese (Traditional), English, Hangul (Korean), Japanese, Russian. 7.
LDB Manager Automatic Lyric Search and Display 33 LDB Manager To display lyrics in iAUDIO, lyrics should be inserted by using LDB Manager. Timing Adjust Window Music Player Used to confirm lyrics information before saving. You can adjust the lyrics’ timing information from Timing Adjust Window. List Window • Add lyrics to MP3 files automatically. • Select files, then press this button to add lyrics automatically. * Internet connection must be available for this function. • Search lyrics manually.
Lyrics Information Automatic Input Application LDB Manager • Delete lyric information from a selected file. • Select a file, then press this button to remove lyric information. • Refresh the contents in List Window. Search Window Lyrics Search Window. This is a window used to search lyrics information for the music file. It is used when automatic search is failed. Enter title information on Search Window, the press Search button.
Advanced Operations Timer 35 Timer 1. Auto Off Auto Off 1 min • When there is no button operation during a preset time while iAUDIO is stopped, iAUDIO is automatically turned off. • You can select from 0, 30 sec, 1, 5, 10, 30 and 60 minutes. 2. Sleep Sleep Off • iAUDIO can be set to automatically turn off after a preset time • You can select from 0, 10, 20, 30, 40, 50, 60, 90, and 120 minutes.
Advanced Operations General General 1. Skip Length Skip Length Track • Set the skip time when moving the lever to , . • You can select Track / 2 / 3 / 4 / 5 / 10 / 15 / 20 / 30 sec. 2. Scan Speed Scan Speed x2 • Set the scan speed when moving and holding the lever to • You can select x1 / x2 / x4 / x8 / x16. , . 3. Resume Resume On • When Resume is On, iAUDIO starts playback from the last played position after it has been stopped or paused. • You can switch it On/Off. 4.
Advanced Operations Recording 37 Recording 1. Line-in bps Linein bps • Choose the quality of the MP3 files recorded by Line-In Recorder. 128 kbps 2. Voice bps (Inner Mic) Voice bps 56 kbps • Choose the quality of the MP3 files recorded by Voice Recorder • Recorded files are always mono regardless of quality settings. 3. FM Radio bps (FM Tuner) FM Radio bps • Choose the quality of the MP3 files recorded by FM Radio Recorder. 128 kbps 4.
Advanced Operations Recording 5. Voice Active Voice Active Off • When Voice Active is On, iAUDIO pauses recording automatically when there is no sound input, and resumes when sound is detected. This feature is very useful to save memory. • You can choose a number between 0~10. A smaller value is more sensitive to sound. If this value is set too high compared to the surrounding noise, the sensitivity of iAUDIO drops, causing it to remain in Waiting status.
Advanced Operations FM Radio 39 FM Radio 1. Stereo FM Stereo Mono Stereo • Choose Stereo or Mono for FM radio listening. 2. Auto Scan FM Radio Stereo Auto Scan Region • It automatically searches for FM stations, then adds them to FM presets. 3. FM Region (Nation Setup) FM Region China Europe Japan • Choose appropriate country where your are listening FM radio. • FM frequency range is adjusted for the selected country.
Advanced Operations Information Information Version (Firmware Version) • Current firmware version number is displayed. Memory • Information about built-in flash memory is displayed. • Used and total available memory is displayed. • Some of the flash memory in iAUDIO is used for system area essential for normal operation of iAUDIO. Therefore, the actual available capacity of the flash memory is somewhat reduced after excluding the system area.
Troubleshooting Symptom The power does not come on. There is no sound. FM radio does not work. Troubleshooting 41 Explanation Check if the Hold switch is On. Try again after turning the Hold switch off. iAUDIO does not operate with the Hold switch On. Check if the same phenomena occurs even after connecting AC adaptor / USB cable. iAUDIO does not work if the battery is weak. Check if the music files are stored in iAUDIO. iAUDIO does not start playback if there is no music files.
Troubleshooting Symptom Troubleshooting Explanation iAUDIO works abnormally or does not play when memory is full. Initialize iAUDIO and leave a free space of at least 1-2MB, then try again. An important system file, “settings. dat” is saved in the Root folder of the flash memory. If this file is not saved properly, deleted, or damaged during file transfer, iAUDIO may not work normally. iAUDIO works abnormally or does not play when hundreds of files are in the root folder.
Using Buttons MP3 Player Mode 43 MP3 Player Mode Key Play/ Pause FF REW MENU Operation In Stop In Play Play current file Stop playback Power Off Power Off Next file Skip to the next file or move forward by specified time Fast forward Fast forward Previous file Skip to the previous file or move backward by specified time Rewind Rewind Setup Menu Setup Menu Navigator Navigator + Volume up Volume up _ Volume down Volume down REC/ A B In key operation, long time.
Using Buttons FM Radio Mode FM Radio Mode Key Operation In Stop In Play Play/ Pause Enter Preset mode Exit Preset mode Power Off Power Off FF Increase frequency Next preset Search the next FM station Next preset Decrease frequency Previous preset Search the previous FM station Previous preset Setup menu Setup menu FM Presets menu FM Presets menu + Volume up Volume up _ Volume down Volume down Start or stop recording Start or stop recording REW MENU REC/ A B iAUDIO U2
Using Buttons Voice Recorder / Line-in Recorder Mode 45 Voice Recorder/Line-in Recorder Mode Key Play/ Pause Operation In Stop In Play Play the recorded file Pause / Resume recording Power Off Power Off FF REW MENU Setup menu Navigator + Volume up _ Volume down REC/ A B Start recording Stop recording iAUDIO U2
Using Buttons Navigator Navigator Key Play/ Pause Operation In Selection File In Selecting Folder Play the selected file and close Navigator Expand folder Play the selected file Expand folder REW Move to the upper folder Move to the upper folder MENU Open pop-up menu Open pop-up Menu Enter Navigation Mode Enter Navigation Mode + Move the focus up Move the focus up _ Move the focus down Move the focus down Close Navigator Close Navigator FF REC/ A B iAUDIO U2
What is JetShell? 47 What is JetShell? JetShell is the iAUDIO manager program providing the following features: • Downloading/Uploading files from/to iAUDIO.
Connecting iAUDIO and Installing JetShell 1. When you insert iAUDIO installation CD in the CD-ROM drive, the installation program starts automatically. It may not start automatically depending on the settings of Windows. In this case, run x:\setup.exe or x:\JetShell\setup.exe. (where x is the letter of your CD-ROM drive) 2. When the installation finishes, Start -> Program -> COWON -> iAUDIO U2 program group is created. 3. You are now ready to connect iAUDIO to PC (Don’t run JetShell at this time).
Connecting iAUDIO and Installing JetShell 49 For Windows 98 / 98 SE The E:\ drive shown in the illustration is an example, and it may be different from the actual drive name used by your PC. It was given for your reference only. 1. Connect the USB ports of iAUDIO to your PC using the provided USB cable. As soon as the cable is connected, "Add New Hardware Wizard" window is displayed. Click Next. 2. Check "Search for the best driver for your device" and click Next.
Connecting iAUDIO and Installing JetShell 3. Check "Specify a location" and click Browse. From the "Browse" window, select the [Win98] folder on the iAUDIO Installation CD, and click OK. 4. USB driver file for iAUDIO is found. Click Next.
Connecting iAUDIO and Installing JetShell 51 5. The driver files are copied and installed from the Installation CD. When the installation finishes, a message notifying you of completion appears as shown in the picture. Click Finish. 6. Finally, make sure that installation of iAUDIO was completed normally by checking "iAUDIO U2 Digital Audio Player" displayed under "Harddisk controller" of "Control Panel / System / Hardware / Device Manager".
Introducing JetShell The Whole View Play and MP3 Management Section File Management Section Flash Memory Management Section File Management Window Download List Management Section When JetShell is running, it controls the iAUDIO.
Introducing JetShell 53 Player Section Double click an MP3, MP2, WAV, WMA, ASF, Audio CD track, or Playlist (m3u) file in the "File Management Window", or drag and drop files on the "Player Window" shown above. You can also select multiple files and then press the Play button. On the black screen in the middle, various information of current file is displayed, and two types of spectrum screens appear.
Introducing JetShell Flash Memory Management Section The bottom part of JetShell consists of "Flash Memory Management Window" and "Download List Window". When iAUDIO is working normally, the red lamp is turned on with the message "iAUDIO is working" as shown in the figure. The files in iAUDIO displayed in the middle window. The "Memory used" bar shown at the bottom right indicates the used memory size of the total flash memory of iAUDIO.
Introducing JetShell 55 JetShell displays visually cool spectrums. When you click on the spectrum display area, the screen changes as follows. You can also enjoy various equalizers and sound effects.
Downloading Music files to iAUDIO Downloading Music files to iAUDIO If you want to download secure WMA files (WMA files from online music store) to iAUDIO, please refer to “Downloading secure WMA files to iAUDIO”. JetShell does not support downloading secure WMA files. You can use Windows Explorer or other file management programs to download music files to iAUDIO. 1. Downloading music files to iAUDIO is very simple. Select files to download from the "File Management Window" and click down arrow. 2.
Downloading Music files to iAUDIO 57 4. Another method is to put the files in the "Download List Window" first, and transfer them later. This is useful when you wish to download files in different folders. 5. You can also download the files existing outside of JetShell by dragging and dropping them onto the "Flash Memory Window".
Deleting Files in iAUDIO Deleting Files in iAUDIO You can delete files in iAUDIO in the same manner as in Window Explorer. Select the files to delete and click button. When confirmation window “Delete from flash memory ?” appears, click Yes to delete them.
Initializing iAUDIO (FORMAT) 59 Initializating iAUDIO (FORMAT) You can format iAUDIO as you do a floppy disk. However, you should take special care when you format it since all data in the memory will be deleted.. 1. Click [File] – [Format Device Memory] in the JetShell menu. 2. When the Format window appears, select “FAT” or “FAT32” for file system option. If JetShell can’t find iAUDIO after formatting, unplug the USB cable, turn iAUDIO on, then reconnect.
ConvertingAudioCDTrackstoMP3FilesandDownloadingThemtoiAUDIO Converting Audio CD Tracks to MP3 Files and Downloading Them to iAUDIO With JetShell, you can easily convert your Audio CD into MP3 files and download them to iAUDIO. 1. Before getting started, you must choose the quality of the MP3 files to create. Click [Setup] –[MP3 Encoder Option] to set the desired bitrate of the MP3 files. (The files compressed in a high bitrate have a higher sound quality and a bigger file size.
ConvertingAudioCDTrackstoMP3FilesandDownloadingThemtoiAUDIO 61 2. From the File Management section, select the CD-ROM drive in which the Audio CD is inserted. Select the audio tracks from the right window and click or [File] –[Convert CD to MP3] from the menu. 3. Specify the path to save the MP3 files in. Choose a folder in iAUDIO to directly download MP3 files onto iAUDIO.
ConvertingAudioCDTrackstoMP3FilesandDownloadingThemtoiAUDIO 4. The converting process is displayed as shown below.
Other Features 63 1. Ripping Enhanced CD For some enhanced CDs, you cannot directly select the tracks on the CD. In this case, you can right click your mouse on button and select a track to convert to file as shown in the picture below. However, for some Audio CDs for which copy protection technology is applied, this ripping method may not work. What is an enhanced CD? This is an audio CD that contains video or data for a PC. The tracks appear when you right click your mouse. 2.
Other Features 3. Editing ID3 Tag You can edit the ID3 tag of a MP3 file by selecting [Tools] – [Edit MP3 ID3 Tag] from the JetShell menu.
Other Features 65 4. Changing MP3 Bitrate You can change the bitrate of MP3 files by selecting [MP3 Bit Rate Conversion] from the menu. 5. Downloading Logo File You can download a logo file to change the logo screen that appears when iAUDIO powers on. Select [Download Logo File] from the menu. When the "Open" window appears, select the desired logo file and click Open. Then the logo file is downloaded and applied.
Installing and Using JetAudio Installing and Using JetAudio The worldwide renowned integrated multimedia player ‘JetAudio’ is included in the iAUDIO Installation CD. To install ‘JetAudio’, run the file "CD-ROM:\JetAudio\setup.exe." For detailed information on using JetAudio, refer to the JetAudio ‘Help’ after installation, or post your question on the Q&A board at the site "http://www. JetAudio.com.
Guide to Firmware Upgrade 67 Guide to Firmware Upgrade A. What is Firmware? Firmware is a program embedded in the hardware, which activates various features. By upgrading the firmware, you can enhance the features of the product and eliminate the bugs. B. Notice for Legal Limitations and Responsibilities Regarding Firmware • The performance and menu of iAUDIO may change without prior notice through firmware upgrades. • When you upgrade the firmware, all the data in the flash memory may be deleted.
Guide to Firmware Upgrade D. Upgrading Firmware * You can download the latest firmware from “www.jetaudio.com” or “www.iaudio.com” ① Decompress the downloaded file and run the "setup.exe" file from among the decompressed files. Then the following window appears. If you have already installed firmware setup program before, the following window may appear. In this case, click OK to remove previous firmware setup program, then run "setup.exe" again.
Guide to Firmware Upgrade 69 ② Read the License Agreement. To continue installation, click Yes. ③ Specify the destination folder, theck click Next.
Guide to Firmware Upgrade ④ Specify a group name, then click Next. ⑤ The files are copied.
Guide to Firmware Upgrade 71 ⑥ The installation is complete. ⑦ Connect the USB ports of iAUDIO to your PC using the provided USB cable.
Guide to Firmware Upgrade ⑧ Run the firmware upgrade program by selecting "Firmware Download" icon in "Start / Programs / COWON iAUDIO U2 / Firmware Download". ⑨ Firmware upgrade program searches iAUDIO. Make sure that iAUDIO is properly connected to the PC. If the program cannot find iAUDIO for a long time, click Cancel, disconnect iAUDIO from PC and try again from step 7.
Guide to Firmware Upgrade 73 ⑩ When firmware upgrade program finds iAUDIO, the following screen appears. If you check [Format Data Area] option, all the data stored in the flash memory is deleted. Therefore, be sure to back up important files in iAUDIO before upgrading. Furthermore, NEVER remove the USB cable during firmware upgrade, since it may cause malfunctions. After upgrading firmware, make sure that the status has changed to READY on the iAUDIO LCD window before disconnecting USB cable.
FCC Statement FCC Statement These products have been tested and comply with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications.