User`s guide

12
iAUDIO 10
Firmware is software that is embedded within the
hardware. Upgrading it can enhance system stability
and provide additional features. Please be advised that
Beta (unofcial) rmware versions may cause system
malfunction.
How to upgrade the rmware
1. Download the latest rmware from the SUPPORT
section of the website (http://www.COWON.com).
2. Use the USB cable to connect iAUDIO 10 to the PC.
3. Unzip the downloaded rmware and copy it to the
root folder of iAUDIO 10.
4. Perform “Safely Remove Hardware” function on your
PC and disconnect the USB cable.
5. When you turn on the product, the rmware upgrade
process will start.
7. The current rmware version can be checked in
Settings System Information.
- Fully charge the player before upgrading the
rmware.
- Do not turn the player off before the rmware
update has been completed. It may damage the
product, and will void any warranty.
- Back up any important data before the rmware
upgrade as any data stored on the device may be
deleted during the process. COWON accepts no
liability for any loss of data.
+ Firmware Upgrade
Before you start!
Downloaded from ManualMPlayer.com Manuals