Operation Manual

COWON D2+

5. General

1. Skip length

· Sets the length of playback time skipped when the buttons are pressed shortly.

2. Scan speed

· Sets the speed of Fast Forward/Rewind when the buttons are pressed and held.

· The faster the speed, the quicker scanning is possible.

3. Resume

· Saves the location of the music file played at the last power off.

· If enabled, when the player is turned on, it automatically plays from the last position where it was

turned off.

4. Fade in

· Gradually increases volume when resuming playback after stop or pause.

· Sets how long it takes to increase the volume.

5. Load Default

·Sets all the settings to default values except for the language

6. User defined button

·User can define a desired function for Pressing and holding button

Basic Operations

4. Timer

1. Time Setup

· Sets the current time.

· Sets the correct time setting for alarm and scheduled recording.

2. Wakeup mode

· Automatically turns on the player at the specified wakeup time.

· Music Alarm plays music and for FM Alarm settings, the last station to be listened to will run in Radio mode.

· For FM recording, it records the last radio frequency from the preset time during the specified time.

NOTE: FM Scheduled Recording uses more power than other features. Always make sure that the player is

fully charged before using this feature.

3. Wakeup Time

· Sets the time to automatically turn the player on.

· Once sets the alarm for one time use, Daily sets the alarm for daily use.

· Duration is the period of time during which the alarm will stay on.

4. Sleep

· Automatically turns off the power after a specified time.

· After the preset time has passed, the player will automatically turn off even if a file is being played at the time.

5. Auto Off

· When the player is stopped and no action is taken after a specified time has elapsed, this feature will auto-

matically turn off the player.

· This function does not operate during playback.