User Guide ver. 1.0 E Downloaded from www.Manualslib.
C O P Y R I G H T N O T I C E General • iAUDIO is a registered trademark of Cowon Systems. • This product is for home use only, and cannot be used for business purposes. • The copyright of this User Guide fully belongs to Cowon Systems, and this User Guide may not be distributed in part or in whole without prior written permission from Cowon Systems.
Downloaded from www.Manualslib.
T a b l e o f C o n t e n t s iAUDIO F1 Precautions for Product Use 1) Before Getting Started 1. What is iAUDIO F1? 2. Package Contents 3. Features and Specifications 4. Description of Each Part 5. LCD Display 6. Connecting the Power and Charging the Battery 7. Connecting to a PC and Charging the Battery 8. Copying Files and Disconnecting from a PC 6 8 2) Basic Instructions 1. Simple Usage 2. Basic Instructions for Mode Change 3. Basic Instructions for Menu Operation 4.
T a b l e o f C o n t e n t s 4) Detailed Features of Each Menu 1. JetEffect 2. Play Mode 3. Display 4. Timer 5. General 6. Recorder 7. FM Radio 8. Information 31 5) Additional Information 1. Installing Device Driver 2. Upgrading Firmware 3. Support for Programs on the CD 40 Troubleshooting 49 5 iAUDIO F1 Downloaded from www.Manualslib.
P r e c a u t i o n s f o r P r o d u c t U s e Take special care not to cut your hands when handling product package, User Guide and accessories. Do not use the product for purposes other than those specified in this User Guide. Do not let the product get wet or keep it in a damp place for a long time. It will be considered as a failure by submersion and will not be serviced free of charge. Furthermore, it may permanently damage the product, so the product may become un-repairible.
P r e c a u t i o n s f o r P r o d u c t U s e Malfunctions may occur when you handle the device with wet hands. Take care not to use the product in a place where there is severe static electricity because this may cause malfunctions. 7 When you listen to the device at a high volume for an extended period, you may experience hearing problems. Always backup important files. All data stored on the device may be deleted when it is serviced.
B e f o r e G e t t i n g S t a r t e d 1. What is iAUDIO F1? A unique brand of multimedia player produced by Cowon Systems, iAUDIO F1 is an ultra-compact portable digital audio device that supports playing of multimedia files including MP3, listening to/recording of FM radio, and recording through an embedded mic or line-in terminal. Portable, Stylish and Ultra-compact Design iAUDIO F1 is easy to carry with its compact size of 75.5mm X 35.5mm X 18.3mm and design inspired by F1 racing machines.
B e f o r e G e t t i n g S t a r t e d 9 Most Powerful Sound Effects Recognized the World Over iAUDIO offers uniquely powerful, yet delicate sound recognized throughout the whole world. The following sound effects are provided: BBE: Produces much clearer music. Mach3Bass: A base booster that accentuates super-low frequencies. MP Enhance: Compensates for lost sound parts. 3D Surround: Produces 3D sound effects.
B e f o r e G e t t i n g S t a r t e d 2. Package Contents Simple USB connector Quick Guide and Installation CD (JetShell, JetAudio, Online User Guide) Necklace-type Earphones iAUDIO (Main body of MP3 player) - This product can be recharged through the USB connector or cable. USB Cable, Line-in Recording Cable iAUDIO F1 Downloaded from www.Manualslib.
B e f o r e G e t t i n g S t a r t e d 11 3. Features and Specifications Playback of MP3, MP2, OGG, WMA, ASF and WAV (up to 48khz, Stereo) files, Listening to/Recording FM Radio, Voice Recording, Line-in Recording, Removable Disk Built-in Flash Memory (256MB/512MB/1GB) USB 2.
B e f o r e G e t t i n g S t a r t e d MP3: MPEG 1/2/2.5 Layer 3, up to 320kbps and 48khz, mono/stereo and VBR Playback Format supportedWMA7: ~ 192kbps, ~ 48khz mono/stereoWMA9: CBR ~ 320kbps, VBR ~ Average 256kbps* mono/stereoOGG: ~q10, ~44.1khz, mono/stereoWAV: ~48khz, 16bit, mono/stereo Memory 256MB/512MB/1GB PC Interface USB 2.
B e f o r e G e t t i n g S t a r t e d 13 4.
B e f o r e G e t t i n g S t a r t e d 5. LCD Display Track information Progress bar Left/Right output graphics Current Track /Total Tracks JetEffect (BBE, M3B, 3D, MP) Battery Level 5 Band EQ Hold BIT RATE Section Playing Repeat Boundary Mode The battery level icon indicates the time remaining for battery use. The number of bars decreases as more battery is used.
B e f o r e G e t t i n g S t a r t e d 15 6. Charing iAUDIO using the AC Adapter To charge the battery of iAUDIO F1 using the AC adapter, 1. Connect the AC adapter to an outlet and the Line-in terminal of iAUDIO. 2. Upon connection, iAUDIO will be automatically powered on and battery charging begins 3. When charging is completed, the following figure appears on LCD. - Never connect the AC adapter to the iAUDIO earphone jack or other audio devices.
B e f o r e G e t t i n g S t a r t e d 8. Copying Files and Disconnecting from a PC 1. While iAUDIO F1 is connected to a PC, run Windows Explorer or JetShell. 2. Copy the music files and other files to use with iAUDIO F1 in the iAUDIO drive. 3. When file copying is completed, click the @@ icon on the system tray. 4. When the following message pops up, click on it. 5. When the safe hardware removal message appears as shown below, disconnect the USB cable.
B a s i c I n s t r u c t i o n s 17 1. Simple Usage 1. Connect some earphones to iAUDIO. 2. Press and hold the “PLAY” button until iAUDIO powers on. 3. The initial screen and preset logo appear, and then the display changes to a standby screen. (You can set iAUDIO to automatically play music upon power on.) 4. Press the “PLAY” button again to start playback. 5. Move the lever to the left or right to play other tracks. Move it up or down to adjust volume. 6.
B a s i c I n s t r u c t i o n s 18 3. Basic Instructions for Menu Operation Example: Using EQ in JetEffect ■ Navigating Between Menus • Press the “MENU” button to open the Menu, and push the lever in the + or - direction to move to another menu. • To open a submenu, press the lever or push it in the ▶▶ direction. • To move to an upper menu, push the lever in the ◀◀ direction. (If the current menu is the highest menu, the display will return to a standby screen.
B a s i c I n s t r u c t i o n s 19 4. Basic Instructions for Navigator Opening Navigator Press and hold the lever to open Navigator. ■ Moving Up/Down in Navigator Press the lever in the + or direction. Selecting Navigator Item To select and open a folder, press the lever or the Popup button to display the Popup window and then select Expand. Or, you can bypass the Popup and enter a folder directly by pushing the lever in the ▶▶ direction.
B a s i c I n s t r u c t i o n s 20 ■ Navigator Popup Window • When you press the “POPUP” button, an appropriate Popup window appears depending on the folder, file, Dynamic PlayList file, Bookmark file, or Radio mode. • Push the lever in the + or - direction to move to a desired item in the popup window. • Press the lever or push it in the ▶▶ direction to select the item in the popup window. • To cancel and close the Popup window, press the “REC” button.
I n s t r u c t i o n s f o r E a c h M o d e 21 1. MP3 Player Mode 1. Power On/Play • When you press the PLAY button, iAUDIO powers on with the iAUDIO logo. • Upon power on, iAUDIO begins playing music. • When Resume is set, the last played track and played position are recalled and playback begins from that point. • To listen to music by moving to MP3 Player mode from another mode after iAUDIO powers on, press the MODE button and select MP3 Player from the menu.
I n s t r u c t i o n s f o r E a c h M o d e 5. Hold When you turn on the HOLD button, iAUDIO will not respond even if you press other buttons. 2. FM Radio Mode (Listening to FM Radio) When you press the FF / REW buttons briefly while FM radio is playing, the frequency moves by 0.1 MHz. When you press the FF / REW buttons for one or two seconds and release it, the nearest frequency with good reception is automatically searched for.
I n s t r u c t i o n s f o r E a c h M o d e 23 3. Voice Recorder Mode (Voice Recording with Embedded Mic) The Voice Recorder mode allows you to record voice using the built-in microphone. 1. Power on iAUDIO and move to Voice Recorder mode. 2. Press the REC button to begin r ecording.fs20cf1lochaf20dbchaf20insrsid3276897 3. Press the REC button again to stop recording. 4. To play a recorded file, press the “PLAY” button. iAUDIO F1 Downloaded from www.Manualslib.
I n s t r u c t i o n s f o r E a c h M o d e 4. Line-in Recorder Mode (Recording through Stereo Cable) In Line-in Recorder mode, you can record the sound from another audio device to iAUDIO via the supplied stereo cable. 1. Connect the headphone jack of CD player and the Line-in jack of iAUDIO using a stereo cable. 2. Power on iAUDIO and move to Line-in Recorder mode. 3. When you press the REC button, iAUDIO waits until an audio signal is detected. iAUDIO follows the settings of Auto Sync.
I n s t r u c t i o n s f o r E a c h M o d e 25 5. Using Buttons (Summary Table for Simple Button Usage for Each Mode) ■ Navigator Mode Key Operation Play FF When a file is selected When a folder is selected The selected file is played and iAUDIO changes to Play mode. Opens the selected folder The selected file is played and Navigator mode is maintained. Opens the selected folder The selected file is played and iAUDIO changes to Play mode. Moves to the upper folder.
I n s t r u c t i o n s f o r E a c h M o d e ■ MP3 Player Mode Key Operation When playback is stopped When playing Plays the current file. Stops playing the current file. Powers off. Powers off. Moves to next file. Moves to the next track, or moves by 5 or 10 seconds depending on the SKIP setting. Moves to next file. Fast forward. Moves to previous file. Moves to the previous track, or moves by 5 or 10 seconds depending on the SKIP setting. Moves to previous file. Fast Rewind.
I n s t r u c t i o n s f o r E a c h M o d e ■ 27 FM Radio Mode Key Operation Operation In Preset Mode Changes to Preset Mode. Changes to Normal Mode. Increases frequency. Moves to the next preset. Automatically searches for next station. Moves to the next preset. Decreases frequency. Moves to the previous preset. Automatically searches for previous station. Moves to the previous preset. + Increases volume. Increases volume. - Decreases volume Decreases volume.
I n s t r u c t i o n s f o r E a c h M o d e ■ Voice Recorder/Linein Recorder Mode Key Operation When playing is stopped Plays a recorded file. Play + Increases volume. - Decreases volume. LEVER Opens Navigator. REC/A B Begins recording. Pauses or resumes recording. Stops recording. Settings menu. MENU In Key Operation, During Operation means a quick button/lever press, and iAUDIO F1 Downloaded from www.Manualslib.
D e t a i l e d F e a t u r e s o f E a c h M e n u JetEffect Equalizer Display Skip Length BBE Scan Speed Mach3Bass Resume MP Enhance Auto Play 3D Surround Charge Pan (Left/Right Balance) Song Order Play Speed Play Mode General Recording Linein Quality Boundary Voice Quality Repeat FM Quality Shuffle Mic Volume View Watch Voice Active Lyrics Line Volume Play Time Auto Sync Song Title FM Radio Streo Scroll Speed Auto Scan Page Sliding Region Tag Language 29 In
D e t a i l e d F e a t u r e s o f E a c h M e n u 1. JetEffect Equalizer In MP3 Player mode, press the MENU button and open JetEffect. Select Equalizer and press the MENU button. The 5-band EQ appears. Move to a setting from among Normal, Rock, Jazz, Classic, Pop, Vocal and User by using the + and - buttons. Each of these EQ presets can be customized. To do this, select the desired EQ and press the FF button to make it adjustable. Then you can change values with the + and - buttons.
D e t a i l e d F e a t u r e s o f E a c h M e n u Pan R Level 0 L 31 6. Pan (Left/Right Balance) Pan allows you to adjust the balance of left and right volume. In MP3 Player mode, press the MENU button and open JetEffect. Select Pan and press the MENU button. A menu appears for you to adjust the level between -20 and +20. You can adjust the value with the + and - buttons. 2. PlayMode 1. Boundary : Boundary allows you to select various playback ranges.
D e t a i l e d F e a t u r e s o f E a c h M e n u 3. Display View Watch 1. View Watch • Displays the current time. • When this is set to On, time is displayed at the position for the folder/album name in MP3 Player mode. • You can set time in the Setup Menu -> Timer -> Set Time menu ON Lyrics ON Play Time Elapse Remain 2. Lyrics • Displays the lyrics of the currently played track. • You can turn lyrics on/off by moving the jog lever up or down when Lyrics is selected.
D e t a i l e d F e a t u r e s o f E a c h M e n u Page Sliding OffID3 tag V1 Fast Normal 6. Page Sliding • Controls the animation effect when opening and closing menus. • You can select Fast, Normal, or Smooth. • This feature applies when you select a value and press the MENU button. Tag Language English Hangul(Korean) Chinese(simpli... 7. Tag Language • Lets you select an ID3 tag language. Menu Language English Hangul(Korean) 8. Menu Language Contrast 9.
D e t a i l e d F e a t u r e s o f E a c h M e n u 4. Timer Set Time 1. Set Time • Lets you set the current time. • To move between items, push the jog lever in the ◀◀ or ▶▶ direction. • To change value, push the jog lever in the + or - direction. 2005 . 06 . 24 02 : 13 PM WakeUp Mode Off Music Alarm FM Alarm FM Record 2. WakeUp Mode • Lets you select an operation mode for the alarm.
D e t a i l e d F e a t u r e s o f E a c h M e n u Sleep Off Auto Off 1 min 35 4. Sleep • Automatically powers off iAUDIO at a preset time while iAUDIO is operating. • You can select from among 0, 10, 20, 30, 40, 50, 60, 90 and 120 min. • Select Sleep and press the MENU button. Then you can select a value with the + and - buttons. 5. Auto Off • Automatically powers off iAUDIO when there is no button operation for a selected time while iAUDIO is stopped.
D e t a i l e d F e a t u r e s o f E a c h M e n u Resume On Auto Play On 3. Resume • Remembers the last played position of the last track. • You can select On or Off. • Select Resume and press the MENU button. Then you can select a value with the + and - buttons. 4. Auto Play • Automatically plays music immediately after iAUDIO powers on. • You can select On or Off. • Select Auto Play and press the MENU button. Then you can select a value with the + and - buttons. Charge Nomal Slow Off 5.
D e t a i l e d F e a t u r e s o f E a c h M e n u 37 6. Recorder Linein Quality MP3 128kbps Voice Quality MP3 128kbps FM Quality MP3 128kbps Mic Volume Level 3 Voice Active Level 3 1. Line-in bps • Sets the bit rate (quality) of MP3 files recorded through line-in. • You can select from among 96, 112 and 128 kbps. • Select Line-in quality and press the MENU button. Then you can select a value with the + and - buttons. 2.
D e t a i l e d F e a t u r e s o f E a c h M e n u Line Volume Level 9 Auto Sync Level 8 6. Line Volume • Adjusts the volume level of the incoming sound from the Line-in jack. • You can select a value between 1 and 10. The larger this value is, the more amplified the sound is. • Select Line Volume and press the MENU button. Then you can select a value with the + and -buttons. 7.
D e t a i l e d F e a t u r e s o f E a c h M e n u FM Stereo America/Europe China Japan Korea Russia 39 3. Auto Scan • Automatically scans and registers FM frequencies. 8. Information FM Stereo Version 9.00.8.37 Memory 77/240MB Battery 3.84V • Version: The current firmware version. • Memory: The remaining/total memory capacity. • Battery: The built-in battery voltage value. iAUDIO F1 Downloaded from www.Manualslib.
A d d i t i o n a l I n f o r m a t i o n 1. Installing Device Driver When using Windows 98 or 98 SE operating systems, you need to install the device driver when connecting iAUDIO to a PC for the first time. ■ Procedure for Driver Installation 1. Connect iAUDIO to a PC via the USB cable. (Refer to Section 7. “Connecting to a PC and Charging the Battery” in “Before Getting Started”.) 2. The Add New Hardware Wizard appears as shown below. Click Next. 3.
A d d i t i o n a l I n f o r m a t i o n 41 4. Click ‘Specify a location to search’ and then click the Browse button. 5. Select the “Win98” folder on the CD-ROM drive, and then click OK. (You can also download this file from the library at our website. www.iAUDIO.com.) 6. After specifying the location to search, click Next. iAUDIO F1 Downloaded from www.Manualslib.
A d d i t i o n a l I n f o r m a t i o n 7. Click Next again. 8. Click Finish. The driver installation is completed. You can check the newly added drive in Windows Explorer. iAUDIO F1 Downloaded from www.Manualslib.
A d d i t i o n a l I n f o r m a t i o n 43 2. Upgrading Firmware A. What is Firmware? Firmware is a program embedded in hardware to control various functions of the hardware. Through firmware upgrades, product features can be enhanced and bugs corrected. B. Limitation of Liability and Legal Notice Regarding Firmware • The performance and menus of iAUDIO are subject to change without prior notice through regular or beta versions of firmware upgrades supplied by the manufacturer.
A d d i t i o n a l I n f o r m a t i o n Follow the instructions given below to install the firmware upgrade. Decompress the downloaded file, and run setup. exe or indicated setup file from among the extracted files. If you have installed a firmware upgrade program before, the above window appears when you run the setup file. To install the firmware upgrade program, click OK to delete the previous version and run the setup file again.
A d d i t i o n a l I n f o r m a t i o n 45 Specify a group name. Files are copied. Installation is complete. iAUDIO F1 Downloaded from www.Manualslib.
A d d i t i o n a l I n f o r m a t i o n Run the firmware upgrade program by selecting Start → Programs → COWON → iAUDIO F1 → Firmware Download. The firmware upgrade program checks/searches the user PC. iAUDIO F1 Downloaded from www.Manualslib.
A d d i t i o n a l I n f o r m a t i o n 47 When the data area formatting is checked (default) on the download options, all the data in the flash memory will be deleted during the firmware upgrade. Therefore, be sure to backup MP3 files and important recorded files stored in iAUDIO F1 to your PC. Furthermore, be careful not to remove the USB cable during the firmware upgrade, as this may cause a failure of the device or various malfunctions.
A d d i t i o n a l I n f o r m a t i o n 3. Support for Programs on the CD The iAUDIO installation CD contains JetAudio, a world-renowned multimedia integrated player program and JetShell, the iAUDIO manager program. (In addition, driver files for Windows 98 and 98 SE are also included.) Refer to the User Guides for the programs in the corresponding folder. The actual folders on the CD may differ from the following figure. iAUDIO F1 Downloaded from www.Manualslib.
T r o u b l e s h o o t i n g Symptom iAUDIO does not power on. There is no sound. FM Radio does not work. Action 49 Description Check whether the battery is in with the correct orientation. When the polarity of the battery is reversed, iAUDIO does not work. Replace the battery with a new one. When the battery power is empty, iAUDIO does not work. Remove the battery and then reinstall it.
T r o u b l e s h o o t i n g Symptom Action The memory is full, but the device malfunctions or does not play back files. Initialize the product, and resend the files with 1 to 2 MB of free space. The settings.dat file, a key system file, is stored in the root folder of flash memory. When this file is not stored properly, or deleted/damaged during file transfer, malfunctions may occur. After saving hundreds of files in the root folder, iAUDIO does not work or malfunctions.
W h a t i s J e t S h e l l ? 51 What is JetShell? JetShell is the iAUDIO manager program providing the following features: • Downloading/Uploading files from/to iAUDIO.
C o n n e c t i n g i A U D I O a n d I n s t a l l i n g J e t S h e l l 1. When you insert iAUDIO installation CD in the CD-ROM drive, the installation program starts automatically. It may not start automatically depending on the settings of Windows. In this case, run x:\setup.exe or x:\JetShell\setup.exe. (where x is the letter of your CD-ROM drive) 2. When the installation finishes, Start -> Program -> COWON -> iAUDIO F1 program group is created. 3.
C o n n e c t i n g i A U D I O a n d I n s t a l l i n g J e t S h e l l 53 For Windows 98 / 98 SE The E:\ drive shown in the illustration is an example, and it may be different from the actual drive name used by your PC. It was given for your reference only. 1. Connect the USB ports of iAUDIO to your PC using the provided USB cable. As soon as the cable is connected, "Add New Hardware Wizard" window is displayed. Click Next. 2.
C o n n e c t i n g i A U D I O a n d I n s t a l l i n g J e t S h e l l 3. Check "Specify a location" and click Browse. From the "Browse" window, select the [Win98] folder on the iAUDIO Installation CD, and click OK. 4. USB driver file for iAUDIO is found. Click Next. iAUDIO F1 Downloaded from www.Manualslib.
C o n n e c t i n g i A U D I O a n d I n s t a l l i n g J e t S h e l l 55 5. The driver files are copied and installed from the Installation CD. When the installation finishes, a message notifying you of completion appears as shown in the picture. Click Finish. 6. Finally, make sure that installation of iAUDIO was completed normally by checking "iAUDIO F1 Digital Audio Player" displayed under "Harddisk controller" of "Control Panel / System / Hardware / Device Manager".
I n t r o d u c i n g J e t S h e l l The Whole View Play and MP3 Management Section File Management Section File Management Window Flash Memory Management Section Download List Management Section When JetShell is running, it controls the iAUDIO. Make sure to exit JetShell before performing the following tasks: • Installing iAUDIO's USB driver • Formatting iAUDIO in Windows Explorer • Upgrading iAUDIO's firmware iAUDIO F1 Downloaded from www.Manualslib.
I n t r o d u c i n g J e t S h e l l 57 Player Section Double click an MP3, MP2, WAV, WMA, ASF, Audio CD track, or Playlist (m3u) file in the "File Management Window", or drag and drop files on the "Player Window" shown above. You can also select multiple files and then press the Play button. On the black screen in the middle, various information of current file is displayed, and two types of spectrum screens appear.
I n t r o d u c i n g J e t S h e l l Flash Memory Management Section The bottom part of JetShell consists of "Flash Memory Management Window" and "Download List Window". When iAUDIO is working normally, the red lamp is turned on with the message "iAUDIO is working" as shown in the figure. The files in iAUDIO displayed in the middle window. The "Memory used" bar shown at the bottom right indicates the used memory size of the total flash memory of iAUDIO.
I n t r o d u c i n g J e t S h e l l 59 JetShell displays visually cool spectrums. When you click on the spectrum display area, the screen changes as follows. You can also enjoy various equalizers and sound effects. Various Equalizers Various Sound Effects iAUDIO F1 Downloaded from www.Manualslib.
D o w n l o a d i n g M u s i c f i l e s t o i A U D I O Downloading Music files to iAUDIO If you want to download secure WMA files (WMA files from online music store) to iAUDIO, please refer to “Downloading secure WMA files to iAUDIO”. JetShell does not support downloading secure WMA files. You can use Windows Explorer or other file management programs to download music files to iAUDIO. 1. Downloading music files to iAUDIO is very simple.
D o w n l o a d i n g M u s i c f i l e s t o i A U D I O 61 4. Another method is to put the files in the "Download List Window" first, and transfer them later. This is useful when you wish to download files in different folders. 5. You can also download the files existing outside of JetShell by dragging and dropping them onto the "Flash Memory Window". iAUDIO F1 Downloaded from www.Manualslib.
C o n v e r t i n g A u d i o C D T r a c k s t o M P 3 F i l e s a n d D o w n l o a d i n g T h e m t o i A U D I O Converting Audio CD Tracks to MP3 Files and Downloading Them to iAUDIO With JetShell, you can easily convert your Audio CD into MP3 files and download them to iAUDIO. 1. Before getting started, you must choose the quality of the MP3 files to create. Click [Setup] –[MP3 Encoder Option] to set the desired bitrate of the MP3 files.
C o n v e r t i n g A u d i o C D T r a c k s t o M P 3 F i l e s a n d D o w n l o a d i n g T h e m t o i A U D I O 63 2. From the File Management section, select the CD-ROM drive in which the Audio CD is inserted. Select the audio tracks from the right window and click or [File] –[Convert CD to MP3] from the menu. 3. Specify the path to save the MP3 files in. Choose a folder in iAUDIO to directly download MP3 files onto iAUDIO. iAUDIO F1 Downloaded from www.Manualslib.
C o n v e r t i n g A u d i o C D T r a c k s t o M P 3 F i l e s a n d D o w n l o a d i n g T h e m t o i A U D I O 4. The converting process is displayed as shown below. iAUDIO F1 Downloaded from www.Manualslib.
O t h e r F e a t u r e s 65 1. Ripping Enhanced CD For some enhanced CDs, you cannot directly select the tracks on the CD. In this case, you can right click your mouse on button and select a track to convert to file as shown in the picture below. However, for some Audio CDs for which copy protection technology is applied, this ripping method may not work. What is an enhanced CD? This is an audio CD that contains video or data for a PC. The tracks appear when you right click your mouse. 2.
O t h e r F e a t u r e s 3. Editing ID3 Tag You can edit the ID3 tag of a MP3 file by selecting [Tools] – [Edit MP3 ID3 Tag] from the JetShell menu. iAUDIO F1 Downloaded from www.Manualslib.
O t h e r F e a t u r e s 67 4. Changing MP3 Bitrate You can change the bitrate of MP3 files by selecting [MP3 Bit Rate Conversion] from the menu. 5. Downloading Logo File You can download a logo file to change the logo screen that appears when iAUDIO powers on. Select [Download Logo File] from the menu. When the "Open" window appears, select the desired logo file and click Open. Then the logo file is downloaded and applied. iAUDIO F1 Downloaded from www.Manualslib.
I n s t a l l i n g a n d U s i n g J e t A u d i o Installing and Using JetAudio The worldwide renowned integrated multimedia player ‘JetAudio’ is included in the iAUDIO Installation CD. To install ‘JetAudio’, run the file "CD-ROM:\JetAudio\setup.exe." For detailed information on using JetAudio, refer to the JetAudio ‘Help’ after installation, or post your question on the Q&A board at the site "http://www.JetAudio. com." iAUDIO F1 Downloaded from www.Manualslib.
