Operation Manual

iAUDIO G2

Replacing Batteries / Connecting the USB Cable

Connecting the USB Cable

When you open the USB cover on the left of iAU-

DIO, there is a built-in USB port. Connect iAUDIO

to the PC while paying attention to the direction of

the USB port.

For Windows XP, you may pull out the USB cable

after the transfer window is closed.

For Windows

2000, however, you should ﬁ rst run “Safely

Remove Hardware” before pulling out the cable.

After downloading ﬁ les, be sure to check that the

iAUDIO LCD display is changed to READY before

pulling out the cable.

Inserting Batteries

1. Push down the cover on the

back of iAUDIO.

2. Flip over and open the cover.

3. Insert the – terminal of the AA

size battery to the right where the

spring is, and then push in the +

terminal to the left.

Downloaded from www.Manualslib.com manuals search engine