Operation Manual

iAUDIO M3

4. Switching Mode: There are four modes: Digital Audio, FM Radio, Voice Recorder, and Line-in Recorder.

■ Opening the Mode Selection Window.

• To switch from one mode to another mode, press the MODE button.

• The Mode window appears for you to select one of the 4 modes.

- This is a function of remote controller. You can only use this feature through the LCD display of the

remote controller.

- You cannot enter the Mode Switching window by pressing the MODE button on main body.

■ Changing Mode

• Using the VOL−/VOL+ button or FF/REW button, change to the desired mode icon among the four

mode icons.

■ Selecting Mode

• After changing to the desired mode icon, select it by pressing the MODE, PLAY, or MENU button.

■ Canceling Mode Switching

• To cancel mode switching and return to the previous mode, press the REC button.

• The mode switching is cancelled and the previous mode window appears.

■ Simple Mode Switching

• When you press the MODE button for a few seconds in any mode, it is immediately switched to the

next mode.

• The mode changes in the following order: Digital Audio →FM Radio →Voice Recorder →Line-in

Recorder.

- The MODE button on main body is activated only when you press it for a few seconds.

(Only Simple mode switching is supported.)

■ 'MODE' LED Status by Mode

• You can easily nd out the operation status of iAUDIO by looking at the ‘MODE ’ LED.

• The LED color changes to blue for Digital Audio Mode, green for FM Radio Mode, and orange for

Recorder Mode.

• When iAUDIO is stopped, paused, or in standby mode for recording, the ‘MODE’ LED blinks at 1

second intervals.

• If there is no user input for some time while the MODE LED is blinking, the Auto Off function

automatically powers off the unit.

Basic Operations

Switching Mode

Press MODE button.

Select with PLAY, MODE or

MENU buttons.

Example: Switching from "Digital Audio" to "FM Radio" mode

Move to the desired mode.

Downloaded from www.Manualslib.com manuals search engine