Operation Manual
iAUDIO M3
24
iAUDIO M3
25
Voice Recorder
(Recording Voice with Built-in Microphone)
Basic Operations
Voice Recorder
1. Preparing Voice Recording
• Turn on iAUDIO, press the MODE button and select Voice Recorder.
• iAUDIO enters Voice Recording Mode and stays in STAND BY status.
2. Voice Recording Start/Pause/Stop
• In STAND BY status, press the REC button to start recording.
• Press the PLAY button to pause recording, and press it again to resume recording.
• Press the REC button again to nish recording. A "Wait" message appears while the le is being saved, and
iAUDIO returns to STAND BY status when the saving nishes.
• The recorded le is saved as VOC***.MP3 in the VOICE folder according to the preset recording quality
(***: a 3-digit serial number).
• You cannot turn off iAUDIO, nor change Menu or Mode while recording.
3. Playing Recorded le
• To play the last recorded le, press the PLAY button in STAND BY status.
• You can also press the MENU button briey in STAND BY status to enter Navigator Mode, and then
select a le to play.
• Operating iAUDIO while a le is played is identical to that of Digital Audio Mode.
• When a le nishes playing, iAUDIO automatically returns to STAND BY status.
• Press the REC button any time to stop playing. iAUDIO returns to STAND BY status again.
4. Recording Quality and Capacity
• For information on recording volumes and quality settings, see the relevant page in this Guide.
• The recorded le size cannot exceed 512MB. If the recorded le reaches this size, iAUDIO automatically
saves it and then continues saving in a new recorded le. (Recording time for one le: Around 10 hours
when the quality setting is 128Kbps)
• When free space in HDD is less than 128MB, recording does not start. If free space becomes less than
128MB during recording, iAUDIO automatically stops.
Select Voice Recorder Mode. Press REC button. Voice Recording Starts. Press REC button to nish recording.
Voice Recorder is in
Stand By status.
Downloaded from www.Manualslib.com manuals search engine