Operation Manual

iAUDIO M3

Line-in Recorder (Direct Encoding)

Basic Operations

Line-in Recorder

1. Preparing Line-in Recording

• Turn on iAUDIO, press the MODE button and select LINE-IN Recorder.

• iAUDIO enters LINE-IN Recorder Mode and stays in Stand By status.

• Connect the headphone jack of CDP and the LINE-IN jack of iAUDIO with a included stereo cable.

2. Line-in Recording Start/Pause/Stop

• Press the REC button in STAND BY status to start recording, and play CDP as soon as recording starts.

• Press the PLAY button to pause recording, and press it again to resume recording.

• Press the REC button again to nish recording. "Wait" message appears while the le is being saved, and

iAUDIO returns to STAND BY status when the saving nishes.

• The recorded le is saved as ENC***.MP3 in the RECORD folder according to the preset recording

quality (***: a 3-digit serial number).

• You cannot turn off iAUDIO, nor change Menu or Mode while recording.

Select Line-in Recorder Mode. iAUDIO is in Stand By. Press REC button. Line-in Recording starts. Press REC button to nish recording.

Downloaded from www.Manualslib.com manuals search engine