Operation Manual

iAUDIO



Connecting to a PC

If the connection is correct, the

following figure appears on LCD.

You may confirm the newly

added drive with a Windows

Explorer.

-You can connect using the separately-sold subpack (cradle).

-Never connect the USB cable and adapter to the device’s USB port while the sub-pack (cradle) is in use because it can cause a

malfunction.

-If using a USB hub, normal functioning cannot be guaranteed. Please connect it to the back of the PC.

A separate driver installation process is needed for Windows 98, and 98 SE.

For driver installation process, please refer to 5. additional description on page 5.

The maximum folder number and file number this product can recognize is 2,000 and 10,000 respectively.

Connect the USB port to the PC

with the supplied USB cable.

Copying

Files and Disconnecting

1. Open Windows Explorer while the iAUDIO M5 is connected to your PC.

2. Copy audio files, graphic files and other files to be used in iAUDIO M5 to the drive.

3. After saving the files, click the

3. After saving the files, click the 3. After saving the files, click the

icon in the PC tray.

4. Click the following popup message when it appears.

The safely remove hardware window comes up.

6. Click the OK button and then disconnect the USB cable.

This product uses a hard disk and must confirm the safe removal of hardware before disconnecting.

If the following message appears, it does not mean product failure. You may execute safe hardware removal after a few moments.

Downloaded from www.Manualslib.com manuals search engine