Use and Care Manual

13
panel, the unit shuts down and will be in the standby mode. If you press "ON/OFF" longer than 5
seconds during ice-making process, then the unit enters the deicing process directly. This function
can help remove the ice on the ice plate. Press "ON/OFF" to shut down the machine.
6. Timing setting：Setting range：1-24 hours
Time shutdown：When the unit is running, it can set up the timing shutdown.
Time on：When the unit is in standby mode, you can set the unit with ON-TIMER.
How to set up the timing
Press the TIMER button, the default timing time is“1H” in the display panel, then press“+” button to
adjust the timing time as you need. Every time you press the“+”button, the time add 1 hour; Press“-”
button can reduce the timing time. During the process of time adjustment,The “H” in the lower corner
of the number will flash, then after 5 seconds flashing without pressing, the “H” letter will change
from flashing to constantly lighting, which means the timer program is completed.
In standby condition, the displayed 5H means the unit will start automatically after 5 hours; In ice-
making condition, the displayed 5H means the machine will shut down automatically after 5 hours,
the "H" in the display screen indicates that the machine currently has timing function, and the
number in front will be smaller and smaller. Until it becomes zero, the timing ends, and the machine
enters the mode you need.
How to cancel timing
When the unit has a timing（the display window will display XX H), press “TIMER” button, the timing
is canceled after the number on the screen and "H" are extinguished.
When the unit has a timing, the display area in the lower left corner will display the timing time and
the ice making setting time, and the display content will be switched every 5S.
7. Automatic self-cleaning program. The default cleaning time is 20 minutes.
Start the self-cleaning program:
After connecting all of the water pipe, plug on the main power supply plug, then press “TIMER
CLEAN” button on the control panel for more than 5 seconds to enter the self-cleaning program. The
symbol will rotate on display screens, and time count down area displays 20M. And the “CLEAN”
light will always be on during this period, the digit window will indicate the left time. The water pump
runs for 8 minutes and stops for 3 minutes, are constantly recycle. The total duration time is 20
minutes for one self-cleaning program. Also, when the water pump stops, the water will supply to the
water tank automatically.
Cancel the self-cleaning program:
It takes about 20 minutes to complete one self-cleaning program. When the program is over, the
system will be in off-state automatically. And also you can press the “ON/OFF” button on the control
panel to cancel the self-cleaning program by force.
8. How to switch Fahrenheit(°F) to Celsius(°c)?
Press “+”or“-”button longer than 5s, it will automatically switch.