Use and Care Manual
Table Of Contents
- When using electrical appliances, basic safety pre
- CAUTION – Risk Of Fire Or Explosion. Flammable Re
- CAUTION-Risk Of Fire Or Explosion Due To Puncture
- If the unit is with problem need to be maintained,
- WARNING:This appliance is intended to be used in h
- IMPORTANT:
- To avoid a hazard due to instability of the applia
- SPECIFICATIONS
- WATER CONNECTION FOR YOUR ICE MAKER
- CLEANING & MAINTENANCE
5
GENERAL INFORMATION
1) Main Unit Construction
①
②
③
④
⑤
⑥
1.
Door
2.
Ice-making & its water tank assembly: Including ice-making evaporator, water tank, water pump
and some detecting parts
3.
Handle
4.
Ice tank
5.
Operation panel
6.
Air outlet: Must keep the air circulating smoothly, hot air will blow out when unit running.
7.
Water draining port: Normal plugged with the cap. When need to drain the water, unplug the cap.
And connect the white drain pipe.
8.
Water inlet port for water supply: Use to connect the water supply pipe.
Accessory: 2-meter white water drain pipe
water quick connector of the water faucet
¢6.35mm diameter white water supply pipe(3 meters long）.
2) Ice-making and its water tank parts
A. Water dividing pipe: with nine little holes, water will flow out from these little holes. And if no
water flows out, can be disassembled and cleaned.
B. Evaporator (ice-making module)
C. Ice full detecting board: Use to detect if the inner cabinet is full of ice or not, and to check if
the ice-harvest process is over or not.
⑦
⑧