Use and Care Manual
Table Of Contents
- When using electrical appliances, basic safety pre
- CAUTION – Risk Of Fire Or Explosion. Flammable Re
- CAUTION-Risk Of Fire Or Explosion Due To Puncture
- If the unit is with problem need to be maintained,
- WARNING:This appliance is intended to be used in h
- IMPORTANT:
- To avoid a hazard due to instability of the applia
- SPECIFICATIONS
- WATER CONNECTION FOR YOUR ICE MAKER
- CLEANING & MAINTENANCE
8
6.
Release the 2 screws on the handle, fix on the opposite side of the door. Remove the screw on the right
fixpiece, fix the left fix piece(from accessory bag) to the door.
hinge pin
Handle
Handle
Right bottom
Hinge
7.
Remove the right bottom hinge by removing the 3 screws, than fix the 3 screw back without hinge.
8.
Remove the hinge pin on the right bottom hinge and reinstall on the left bottom hinge.
9.
Remove the 3 screws from the left side and fix the left bottom hinge on the unit.
10.
Place the door on the left bottom hinge. With the magnetic gasket holding the door in place, make sure
the door is aligned with the unit, and secure the top hinge on the left with 2 screws.
11.
Open and close both the door several times to confirm the door is positioned correctly and the gasket is
sealed well. If this is not the case, please adjust the door again.
12.
Fix the Fix Plate back on the right side. Fix the top cover with 2 screws, cover the screw hole with
theScrew hole cover.
13.
Wait at least 30 minutes before plugging in the refrigerator to allow the
refrigerant to settle down. Then plug in the unit.
Left fix
piece
Right
piece
Change
Move
fix