Use and Care

18
V1.1
a. One screw is located under rear flue cover.
b. Two screws are located behind front grease tray.
3. Lift griddle plate out of grill.
4. Remove the rear screw securing each burner.
5. Lift burner out from the rear. To prevent damage to the electrode do not remove the burner completely.
(Note: You can remove the electrode for additional clearance, but it isn't necessary to complete the
conversion.)
6. Use a nut driver to remove the orifice from the valves located on the front of the grill where the burners
were located.
7. Install new orifices.
8. Change regulator on gas line.
9. Re-assemble in reverse and test all connections again with a soapy water solution to ensure no leaks.
Instruction for Connecting the Transformer
1. Transformer for LED Lights - Your grill's electrical transformer will connect on the left rear corner of your
grill (looking at it from the rear) and operates the knob lights on the front of your grill. Follow the pictures
and insert the black male plug into the female socket on the included transformer, then plug the transformer
into a standard 110v outlet. If you have any questions or concerns, please consult or use a qualified
electrician. (Note: the LED knobs will only work when the griddle is connected to a gas source.)
Transformer Male Plug Complete Connection