Manual
8
HoseandRegulator
TheType1connectionsystemhasthefollowingfeatures:
- The system will not allow gas to flow until a positive connection has
beenmade.
NOTE: The cylinder control valve must be turned off before any
connectionismadeorremoved.
- The system has a thermal element that will shut off
the flow of gas in
theeventofafire.
- Thesystemhasaflowlimitingdevicewhich,whenactivated,willlimittheflowofgasto10cubicfeetper
hour.
- NEVERusesideburnerwithoutleaktestingthisconnection.
LP(Propane)GasSupplyConnection
1. The tank valve should be in the “OFF” position. If not, turn the knob
clockwiseuntilitstops.
2. Makesureallburnervalvesareinthe“OFF”position.
3. Alwaysconnectthegassupplyregulatorasfollows:
Insert the regulator inlet into the tank valve and turn the coupling nut
clockwiseuntilthecouplertightensup(seepicture).Donotovertightenthe
coupler.Turn themaintankvalveonandturntheburnercontrolvalveson
the unit to the “HIGH” position for about 20 seconds to allow the air in the system to purge before
attemptingtolighttheburners.
PRE‐OPERATIONLEAKTESTING
DANGER
1. Donotinsertanytoolintothevalveoutletorsafetyreliefvalve.Youmaydamagethevalveandcausea
leak.Leakingpropanemayresultinexplosion,fire,severepersonalinjury,ordeath.
2. Ifaleakisdetectedatanytimeoryoucannotstopagasleak,
immediatelyclosepipelinevalveandcallLP
gassupplieroryoufiredepartment!
3. Checkallgassupplyfittingsbeforeeachuseandeachtimethegassupplycylinderisconnectedtothe
regulator.Haveaqualifiedservicetechnicianleaktestthesideburneranytimeapartofthe
sideburner
systemisreplaced.
WARNING
Neverattempttoattachthissideburnertotheself‐containedLPgassystem.Donotusesideburneruntilleak
testing.
WARNING: Always take a leak test before lighting the side burner to prevent a possible fire or
explosion. Never store a spare propane cylinder in the vicinity of this side burner, or in the vicinity of
an
y
other
p
otential heat source.