Full Product Manual

1018454-EPage 15
ADJ
PILOT
IN
STEP4.
- Connect Black TP wire to the
TP terminal of valve.
- Connect Green TH wire to TH terminal
of the valve.
- Connect Orange THTP wire to the
THTP terminal of the valve.
NOTE: Ensure that all of the
connections are tightened firmly.
o
r
a
n
g
e
w
i
r
e
TH
TP
THTP
black wire
g
r
e
e
n
w
i
r
e
STEP3.
Run a cable tie (48) through the
small hole beside the notch on the
mounting plate (30).
Gather all the wires from the control
module (29) with the cable tie (48).
Guide any excess wire length
back into the heater.
48
30
29
ELECTRICAL CONNECTION
WARNING: Please Use Caution While Installing the Electrical Connection